Page not found
BROWSE THOUSANDS OF LUMBER PRODUCTS
Individual Pieces
Pre-cut Sizes
$23.00
Argentine Osage Orange Peppermill blank.
Price is for 1 blank. Sometimes there are more than one in the photograph to show you the range of colors and figures that are possible.
Dimensions: 3″x3″x12″
You get discounts at 5, 10 and 20 pieces.
The photographs are representative of the stock you will receive. You won’t typically received surfaced blanks, but we surface a few on the photographs to give you an idea of what the lumber looks like.
Lumber Packs
$180.00
20 BF Sassafras project pack
Lengths: 48″-92″ (last piece might be shorter to balance bd.ft total)
Widths: 4″ and wider
Thickness: 4/4 nominal
Grade: 1 common + better
We S2S by default – surfaced thickness will be up to 1/4″ less than nominal thickness. (image is of S2S boards)
You can choose to get the lumber in the rough by selecting Machining = none and get an additional $20 off.
Note:
Lead time is 3 working days.
Ships free via UPS/USPS.
$280.00
20 BF Curly Cherry project pack
Lengths: 48″-92″ (last piece might be shorter to balance bd.ft total)
Widths: 4″ and wider
Thickness: 4/4 nominal
Grade: 1 common + better
We S2S by default – surfaced thickness will be up to 1/4″ less than nominal thickness. (image is of S2S boards)
You can choose to get the lumber in the rough by selecting Machining = none and get an additional $20 off.
Note:
Lead time is 3 working days.
Ships free via UPS/USPS.
$361.00
20 BF Medium-Heavy Figure Birdseye Maple – Heart two faces (Brown) project pack
Figure: Medium-Heavy
Color: Some brown/heart on both faces and/or higher figured face
Lengths: 60″-92″ (last piece might be shorter to balance bd.ft total)
Widths: 4″ and wider
Thickness: 4/4 nominal
We S2S by default – surfaced thickness will be up to 1/4″ less than nominal thickness.
You can choose to get the lumber in the rough by selecting Machining = none and get an additional $20 off.
Note:
Lead time on rough lumber is 2 working days.
Lead time on S2S is 3 working days.
Ships free via UPS/USPS.
$1,632.04
Stunning Kingwood Boule – sold as one
All pieces are from the same log, so book-matched.
Sold individually pieces would cost over $1600. Now on special for $1200
NB: Boule width tapers from 5.75″-5.25″
PIECE | LEN | WID | THI | LB | GRD | NOTES |
KINGB1315A | 69 | 5.5 | 1.00 | 15.65 | AB | Lovely board |
KINGB1315B | 69 | 5.5 | 1.00 | 14.65 | AB | Heart defect one face |
KINGB1315C | 69 | 5.5 | 1.25 | 17.65 | C | Heart defect |
KINGB1315D | 69 | 5.5 | 1.00 | 14.65 | A | Beautiful |
KINGB1315E | 69 | 5.5 | 0.90 | 13.55 | AB | Thickness tapers to .75″ |
On Sale!
$2,055.68 $1,750.00
Stunning Kingwood Boule – sold as one
All pieces are from the same log, so book-matched.
Sold individually pieces would cost over $2000. Now on special for $1750
PIECE | LEN | WID | THI | LB | GRD | NOTES |
KINGB186A | 56.0 | 6.5 | 1.0 | 5.4 | A | Solid, no checks. |
KINGB186B | 56.0 | 7.3 | 0.9 | 6.5 | A | Widest point 8”. |
KINGB186C | 56.0 | 7.8 | 1.4 | 10.6 | AB | Cracks on ends. |
KINGB186D | 56.0 | 7.3 | 1.0 | 6.2 | A | Widest point 8”. Check one end. |
KINGB186E | 56.0 | 5.8 | 1.0 | 12.2 | A | Clear two face. |
$394.43 $276.10
Max width 8″. Min width 6.25″. Large defect one end. Good face has 2 small knots. Defects on reverse face
$410.42 $287.29
Max width 7″. Min 6″. Some checks through center of board