Page not found
BROWSE THOUSANDS OF LUMBER PRODUCTS
Individual Pieces
Pre-cut Sizes
Ash Bowl Blank
Excellent quality lumber
End-grain has been sealed
Size can vary by 1/8 of an inch. Please reach out if you have very strict size criteria.
Note: photo is representative of the stock you will receive.
$3.00
Our Cedrorana/Tornillo turning squares are good quality 1.5×1.5×21 spindles.
You get discounts at 5, 10 and 20 pieces.
The photographs are representative of the stock you will receive. You won’t typically received surfaced blanks, but we surface a few on the photographs to give you an idea of what the lumber looks like.
Our Padauk bowl blanks come in two sizes and are excellent quality lumber.
The end-grain as been sealed. The sizes are all rough-guides, but are basically accurate. If you have very strict size criteria, please just drop us an email to confirm they will meet your expectations.
The photographs are representative of the stock you will receive. You won’t typically received surfaced blanks, but we surface a few on the photographs to give you an idea of what the lumber looks like.
Our Ziricote turning squares come in range of sizes and are excellent quality lumber.
The sizes are all rough-guides, but are basically accurate.
If you have very strict size criteria, please just drop us an email to confirm they will meet your expectations.
The photographs are representative of the stock you will receive. You won’t typically received surfaced blanks, but we surface a few on the photographs to give you an idea of what the lumber looks like.
Lumber Packs
20 BF Spanish Cedar project pack
Lengths: 48″-92″ (last piece might be shorter to balance BF total)
Widths: 4″ and wider
Thickness: Choose 4/4 or 6/4 lumber.
We S2S by default – surfaced thickness will be up to 1/4″ less than nominal thickness.
You can choose to get the lumber in the rough by selecting Machining = none and get an additional $20 off.
Note:
Lead time is 3 working days.
Ships free via UPS/USPS.
$400.00
20 BF Berlinia project pack.
Note: The Berlinia we currently have available is well represented by the image above. It does not have the uniforn red-zebra striping found in certain species of the Berlinia genus.
Lengths: 48″-92″ (last piece might be shorter to balance bd.ft total)
Widths: 4″ and wider
Thickness: 4/4 nominal
We S2S by default – surfaced thickness will be up to 1/4″ less than nominal thickness. (image is of S2S boards)
You can choose to get the lumber in the rough by selecting Machining = none and get an additional $20 off.
Note:
Lead time is 3 working days.
Ships free via UPS/USPS.
$214.00
20 BF Elm – 1 Common project pack
Lengths: 48″-92″ (last piece might be shorter to balance bd.ft total)
Widths: 4″ and wider
Thickness: 4/4 nominal
We S2S by default – surfaced thickness will be up to 1/4″ less than nominal thickness.
You can choose to get the lumber in the rough by selecting Machining = none and get an additional $20 off.
Note:
Lead time is 3 working days.
Ships free via UPS/USPS.
$850.00
20 BF Amara Ebony project pack
Lengths: 48″-92″ (last piece might be shorter to balance bd.ft total)
Widths: 3″ and wider
Thickness: 4/4 nominal
We S2S by default – surfaced thickness will be up to 1/4″ less than nominal thickness.
You can choose to get the lumber in the rough by selecting Machining = none and get an additional $20 off.
Note:
Lead time is 3 working days.
Ships free via UPS/USPS.
On Sale!
$394.43 $276.10
Max width 8″. Min width 6.25″. Large defect one end. Good face has 2 small knots. Defects on reverse face
$410.42 $287.29
Max width 7″. Min 6″. Some checks through center of board
$474.90 $332.43
Max width 8″. Min width 7″. Hairline cracks on one face. Good face has minor end checks one end.