Page not found
BROWSE THOUSANDS OF LUMBER PRODUCTS
Individual Pieces
Pre-cut Sizes
$45.00
6-piece pack: B Grade Kingwood Turning Squares.Rough Dimensions: 1.5×1.5×12″50% cheaper than our A grade price.Pieces might have wane, sap, cracks present and/or be of lower color quality.We photograph all 4 sides of each piece/pack. What you see is what you get.
$12.00 – $44.00
Our African Blackwood turning blanks come in range of sizes and are excellent quality lumber.
The sizes are all rough-guides, but are basically accurate.
If you have very strict size criteria, please just drop us an email to confirm they will meet your expectations.
The photographs are representative of the stock you will receive.
Lumber Packs
20 BF African Mahogany project pack
Lengths: 60″-92″ (last piece might be shorter to balance BF total)
Widths: 4″ and wider
Thickness: Choose 4/4, 6/4 or 8/4 nominal
We S2S by default – surfaced thickness will be up to 1/4″ less than nominal thickness.
You can choose to get the lumber in the rough by selecting Machining = none and get an additional $20 off.
Note:
Lead time is 3 working days.
Ships free via UPS/USPS.
$680.00
20 BF Morado project pack
Lengths: 48″-92″ (last piece might be shorter to balance BF total)
Widths: 4″ and wider
Thickness: Choose 4/4 or 8/4 (nominal thickness)
We S2S by default – surfaced thickness will be up to 1/4″ less than nominal thickness.
You can choose to get the lumber in the rough by selecting Machining = none and get an additional $20 off.
Note:
Lead time is 3 working days.
Ships free via UPS/USPS.
$219.00 – $266.00
20 BF Flame Birch project pack
Lengths: 60″-92″ (last piece might be shorter to balance BF total)
Widths: 4″ and wider
Thickness: Choose 4/4, 5/4 or 8/4 (nominal thickness)
We S2S by default – surfaced thickness will be up to 1/4″ less than nominal thickness.
You can choose to get the lumber in the rough by selecting Machining = none and get an additional $20 off.
Note:
Lead time is 3 working days.
Ships free via UPS/USPS.
$190.00
20 BF Red Oak project pack
Lengths: 48″-92″ (last piece might be shorter to balance bd.ft total)
Widths: 4″ and wider
Thickness: 4/4 nominal
Grade: Select + better
We S2S by default – surfaced thickness will be up to 1/4″ less than nominal thickness.
You can choose to get the lumber in the rough by selecting Machining = none and get an additional $20 off.
Note:
Lead time is 3 working days.
Ships free via UPS/USPS.
On Sale!
$2,055.68 $1,750.00
Stunning Kingwood Boule – sold as one
All pieces are from the same log, so book-matched.
Sold individually pieces would cost over $2000. Now on special for $1750
PIECE | LEN | WID | THI | LB | GRD | NOTES |
KINGB186A | 56.0 | 6.5 | 1.0 | 5.4 | A | Solid, no checks. |
KINGB186B | 56.0 | 7.3 | 0.9 | 6.5 | A | Widest point 8”. |
KINGB186C | 56.0 | 7.8 | 1.4 | 10.6 | AB | Cracks on ends. |
KINGB186D | 56.0 | 7.3 | 1.0 | 6.2 | A | Widest point 8”. Check one end. |
KINGB186E | 56.0 | 5.8 | 1.0 | 12.2 | A | Clear two face. |
$289.11 $202.38
Max width 8″. Min width 6.5″. Defects one end. Checking at other end.
$380.02 $266.01
Max width 8.5″. Min width 3.75″. Crack on one face
$1,875.93 $1,700.00
Stunning Kingwood Boule – sold as one
All pieces are from the same log, so book-matched.
Sold individually pieces would cost almost $1900. Now on special for $1700
PIECE | LEN | WID | THI | LB | GRD | NOTES |
KINGB190A | 60.75 | 5.50 | 1.00 | 5.4 | A | Nice Board. |
KINGB190B | 60.5 | 6.50 | 1.06 | 6.5 | A | 6″ crack on end. |
KINGB190C | 61.0 | 7.00 | 2.25 | 10.6 | C | Rustic. |
KINGB190D | 60.5 | 6.00 | 1.00 | 6.2 | A | Small crack on end. |