Page not found
BROWSE THOUSANDS OF LUMBER PRODUCTS
Individual Pieces
$30.90
Knot with defect. Defects on surface and edge. Knot.
Pre-cut Sizes
$45.00
Bookmatched Guitar Sides set
Lumber Packs
$2,055.68 $1,750.00
Stunning Kingwood Boule – sold as one
All pieces are from the same log, so book-matched.
Sold individually pieces would cost over $2000. Now on special for $1750
PIECE | LEN | WID | THI | LB | GRD | NOTES |
KINGB186A | 56.0 | 6.5 | 1.0 | 5.4 | A | Solid, no checks. |
KINGB186B | 56.0 | 7.3 | 0.9 | 6.5 | A | Widest point 8”. |
KINGB186C | 56.0 | 7.8 | 1.4 | 10.6 | AB | Cracks on ends. |
KINGB186D | 56.0 | 7.3 | 1.0 | 6.2 | A | Widest point 8”. Check one end. |
KINGB186E | 56.0 | 5.8 | 1.0 | 12.2 | A | Clear two face. |
$400.00
20 BF Berlinia project pack.
Note: The Berlinia we currently have available is well represented by the image above. It does not have the uniforn red-zebra striping found in certain species of the Berlinia genus.
Lengths: 48″-92″ (last piece might be shorter to balance bd.ft total)
Widths: 4″ and wider
Thickness: 4/4 nominal
We S2S by default – surfaced thickness will be up to 1/4″ less than nominal thickness. (image is of S2S boards)
You can choose to get the lumber in the rough by selecting Machining = none and get an additional $20 off.
Note:
Lead time is 3 working days.
Ships free via UPS/USPS.
$228.00
20 BF Low-Medium Figure Birdseye Maple – Heart 2 Faces (Brown) project pack
Figure: Low-Medium
Color: Some brown on both faces (or more figured face)
Lengths: 60″-92″ (last piece might be shorter to balance bd.ft total)
Widths: 4″ and wider
Thickness: 4/4 nominal
We S2S by default – surfaced thickness will be up to 1/4″ less than nominal thickness.
You can choose to get the lumber in the rough by selecting Machining = none and get an additional $20 off.
Note:
Lead time on rough lumber is 2 working days.
Lead time on S2S is 3 working days.
Ships free via UPS/USPS.
$680.00
20 BF Morado project pack
Lengths: 48″-92″ (last piece might be shorter to balance BF total)
Widths: 4″ and wider
Thickness: Choose 4/4 or 8/4 (nominal thickness)
We S2S by default – surfaced thickness will be up to 1/4″ less than nominal thickness.
You can choose to get the lumber in the rough by selecting Machining = none and get an additional $20 off.
Note:
Lead time is 3 working days.
Ships free via UPS/USPS.
On Sale!
$410.42 $287.29
Max width 7″. Min 6″. Some checks through center of board
$852.78 $596.95
Surface checks in sapwood. End checks and pith one side.
$405.36 $283.75
Max width 9″. Min width 6.5″. Hairline cracks on sappy face. One large defect with hairline crack on good face
$2,055.68 $1,750.00
Stunning Kingwood Boule – sold as one
All pieces are from the same log, so book-matched.
Sold individually pieces would cost over $2000. Now on special for $1750
PIECE | LEN | WID | THI | LB | GRD | NOTES |
KINGB186A | 56.0 | 6.5 | 1.0 | 5.4 | A | Solid, no checks. |
KINGB186B | 56.0 | 7.3 | 0.9 | 6.5 | A | Widest point 8”. |
KINGB186C | 56.0 | 7.8 | 1.4 | 10.6 | AB | Cracks on ends. |
KINGB186D | 56.0 | 7.3 | 1.0 | 6.2 | A | Widest point 8”. Check one end. |
KINGB186E | 56.0 | 5.8 | 1.0 | 12.2 | A | Clear two face. |
WOOD OF THE WEEK
15% off - this week only
Wenge is unique among the world’s exotic woods. This tough tropical wood’s distinctive deep chocolate color — which can sometimes augmented by muted gold, orange, red or even burgundy tint — is actually known as “Wenge” in the color spectrum nomenclature of various parts of the world (with paint manufacturers, etc.). Its grains are generally straight (though sometimes wavy or irregular) and are accenuated by overlapping black lines which typically decorate the board’s surface.
While being considered a strong, durable wood, Wenge’s course, rugged texture makes it very splintery — making some craftsmen hesitant to use it. It can be difficult to work, although is glues well and is considered a very dimensionally stable species.
Exercise caution when working with this wood. Its splinters can be like little razors and when one pentetrates the skin, it is quite painful and the area can quickly and easily get infected, if quick action isn’t taken to remove it (the splinter) and sterilize the area.
Although most sources consider Wenge to be a dull wood with poor natural luster, our experience has revealed that a deep, glossy luster can sometimes emerge through fine-grit sanding of flatsawn boards. Its combination of relatively light weight, rot & insect resistance and impressive tensil strength has yielded the wood to a variety of indoor and outdoor uses, being particularly well suited for flooring in heavy traffic areas.
Main Color Group | Dark Brown |
Grain Pattern | Pronounced |
Avg Dry Weight - LB/BF | 4.5 |
Avg Dry Weight - KG/M3 | 870 |
Janka Hardness - LBF | 1930 |
Janka Hardness - N | 8600 |