Page not found
BROWSE THOUSANDS OF LUMBER PRODUCTS
Individual Pieces
Pre-cut Sizes
$40.00
American Walnut Bowl Blank
Excellent quality lumber
End-grain has been sealed
Note: photo is representative of the stock you will receive.
Price is for one blank.
$30.00
Wenge Fingerboard
21″ x 3″ x 0.30″ (minimum)
Manufactured with luthiers in mind, but excellent blanks for box-making and other smaller items
Photographs are representative of what you will receive
If you have a strict dimensional requirement, please contact us to confirm we select the correct dimensions for you.
Lumber Packs
$247.00
20 BF Low-Medium Figure Birdseye Maple W1F project pack
Figure: Low-Medium
Color: White 1 Face and Better
Lengths: 60″-92″ (last piece might be shorter to balance bd.ft total)
Widths: 4″ and wider
Thickness: 4/4 nominal
We S2S by default – surfaced thickness will be up to 1/4″ less than nominal thickness.
You can choose to get the lumber in the rough by selecting Machining = none and get an additional $20 off.
Note:
Lead time on rough lumber is 2 working days.
Lead time on S2S is 3 working days.
Ships free via UPS/USPS.
$490.00 – $500.00
20 BF Zebrawood project pack
Lengths: 60″-92″ (last piece might be shorter to balance BF total)
Widths: 4″ and wider
Choose 4/4, 6/4 or 8/4
We S2S by default – surfaced thickness will be up to 1/4″ less than nominal thickness.
You can choose to get the lumber in the rough by selecting Machining = none and get an additional $20 off.
We can select Zebrawood for quartersawn or flatsawn. If you have a preference, please let us know in the order notes.
Note:
Lead time is 3 working days.
Ships free via UPS/USPS.
$380.00
20 BF Medium-Heavy Figure Birdseye Maple W1F project pack
Figure: Medium-Heavy
Color: White 1 Face or Better
Lengths: 60″-92″ (last piece might be shorter to balance bd.ft total)
Widths: 4″ and wider
Thickness: 4/4 nominal
We S2S by default – surfaced thickness will be up to 1/4″ less than nominal thickness.
You can choose to get the lumber in the rough by selecting Machining = none and get an additional $20 off.
Note:
Lead time on rough lumber is 2 working days.
Lead time on S2S is 3 working days.
Ships free via UPS/USPS.
$242.00 – $261.00
20 BF African Walnut project pack
Lengths: 48″-92″ (last piece might be shorter to balance BF total)
Widths: 4″ and wider
Thickness: Choose 4/4, 6/4 or 8/4 nominal
We S2S by default – surfaced thickness will be up to 1/4″ less than nominal thickness.
You can choose to get the lumber in the rough by selecting Machining = none and get an additional $20 off.
Note:
Lead time is 3 working days.
Ships free via UPS/USPS.
On Sale!
$474.90 $332.43
Max width 8″. Min width 7″. Hairline cracks on one face. Good face has minor end checks one end.
$2,055.68 $1,750.00
Stunning Kingwood Boule – sold as one
All pieces are from the same log, so book-matched.
Sold individually pieces would cost over $2000. Now on special for $1750
PIECE | LEN | WID | THI | LB | GRD | NOTES |
KINGB186A | 56.0 | 6.5 | 1.0 | 5.4 | A | Solid, no checks. |
KINGB186B | 56.0 | 7.3 | 0.9 | 6.5 | A | Widest point 8”. |
KINGB186C | 56.0 | 7.8 | 1.4 | 10.6 | AB | Cracks on ends. |
KINGB186D | 56.0 | 7.3 | 1.0 | 6.2 | A | Widest point 8”. Check one end. |
KINGB186E | 56.0 | 5.8 | 1.0 | 12.2 | A | Clear two face. |
$410.42 $287.29
Max width 7″. Min 6″. Some checks through center of board
$1,875.93 $1,700.00
Stunning Kingwood Boule – sold as one
All pieces are from the same log, so book-matched.
Sold individually pieces would cost almost $1900. Now on special for $1700
PIECE | LEN | WID | THI | LB | GRD | NOTES |
KINGB190A | 60.75 | 5.50 | 1.00 | 5.4 | A | Nice Board. |
KINGB190B | 60.5 | 6.50 | 1.06 | 6.5 | A | 6″ crack on end. |
KINGB190C | 61.0 | 7.00 | 2.25 | 10.6 | C | Rustic. |
KINGB190D | 60.5 | 6.00 | 1.00 | 6.2 | A | Small crack on end. |
WOOD OF THE WEEK
15% off - this week only
Wenge is unique among the world’s exotic woods. This tough tropical wood’s distinctive deep chocolate color — which can sometimes augmented by muted gold, orange, red or even burgundy tint — is actually known as “Wenge” in the color spectrum nomenclature of various parts of the world (with paint manufacturers, etc.). Its grains are generally straight (though sometimes wavy or irregular) and are accenuated by overlapping black lines which typically decorate the board’s surface.
While being considered a strong, durable wood, Wenge’s course, rugged texture makes it very splintery — making some craftsmen hesitant to use it. It can be difficult to work, although is glues well and is considered a very dimensionally stable species.
Exercise caution when working with this wood. Its splinters can be like little razors and when one pentetrates the skin, it is quite painful and the area can quickly and easily get infected, if quick action isn’t taken to remove it (the splinter) and sterilize the area.
Although most sources consider Wenge to be a dull wood with poor natural luster, our experience has revealed that a deep, glossy luster can sometimes emerge through fine-grit sanding of flatsawn boards. Its combination of relatively light weight, rot & insect resistance and impressive tensil strength has yielded the wood to a variety of indoor and outdoor uses, being particularly well suited for flooring in heavy traffic areas.
Main Color Group | Dark Brown |
Grain Pattern | Pronounced |
Avg Dry Weight - LB/BF | 4.5 |
Avg Dry Weight - KG/M3 | 870 |
Janka Hardness - LBF | 1930 |
Janka Hardness - N | 8600 |