Shopping Cart

Page not found

BROWSE THOUSANDS OF LUMBER PRODUCTS

Individual Pieces
BOC1334_1

$69.95

BOC1334
0.81" x 5.75" x 47.88"

Cracks. Defect on edge. Skip planed.

ROSEEI1266_1

$42.52

ROSEEI1266
0.94" x 4.44" x 38.63"

Skip planed,Crack

CHERR1338_1

$39.10

CHERR1338
0.94" x 7.13" x 49.19"

Defect on edge. Knot and bark inclusion. minor defects on edge.

WALNAM1321_1

$33.32

WALNAM1321
0.94" x 6.5" x 40.19"

Edge defect,Wormhole

COCO1336_1

$117.70

COCO1336
0.88" x 5.88" x 35.94"

Bark inclusion.

Pre-cut Sizes
SIDEROSEEI1352_1

$45.00

SIDEROSEEI1352
0.22" x 5.4" x 34.75"

Bookmatched Guitar Sides set

LIGVITA1004_1

$45.06

LIGVITA1004
3" x 3" x 8.75"

End checks.

FINGERMAPBE1001_1

$25.00

FINGERMAPBE1001
0.3" x 3" x 21"

Medium figure

May contain light and dark color

21.0″ x 3.0″ x 0.30″ (minimum)

Manufactured with luthiers in mind, but excellent blanks for boxmaking and other smaller items

Photographs are representative of what you will receive

FINGERBLAF_1

$50.00

FINGERBLAF1001
0.3" x 2.7" x 20.5"

African Blackwood Fingerboard

20.5″ x 2.65″ x 0.30″ (minimum)

Manufactured with luthiers in mind, but excellent blanks for box-making and other smaller items

Photographs are representative of what you will receive

Lumber Packs
projwalnaf1024

$242.00$261.00

PROJWALNAFR1001
" x " x "

20 BF African Walnut project pack

Lengths: 48″-92″ (last piece might be shorter to balance BF total)
Widths: 4″ and wider
Thickness: Choose 4/4, 6/4 or 8/4 nominal

We S2S by default – surfaced thickness will be up to 1/4″ less than nominal thickness.
You can choose to get the lumber in the rough by selecting Machining = none and get an additional $20 off.

Note:
Lead time is 3 working days.
Ships free via UPS/USPS.

kiaat20bf

$320.00

PROJKIAAT1001
" x " x "

20 BF Kiaat project pack

Lengths: 60″-92″ (last piece might be shorter to balance BF total)
Widths: 4″ and wider
Thickness: Choose 4/4, 6/4 or 8/4 (nominal thickness)

We S2S by default – surfaced thickness will be up to 1/4″ less than nominal thickness.
You can choose to get the lumber in the rough by selecting Machining = none and get an additional $20 off.

Note:
Lead time is 3 working days.
Ships free via UPS/USPS.

projchech1024

$380.00

PROJCHECH1001
1" x 4" x 48"

20 BF Chechen project pack

Lengths: 48″-92″ (last piece might be shorter to balance bd.ft total)
Widths: 4″ and wider
Thickness: 4/4 nominal

We S2S by default – surfaced thickness will be up to 1/4″ less than nominal thickness.
You can choose to get the lumber in the rough by selecting Machining = none and get an additional $20 off.

Note:
Lead time is 3 working days.
Ships free via UPS/USPS.

projgran1024

$380.00

PROJGRAN1001
1" x 4" x 48"

20 BF Granadillo project pack

Lengths: 48″-92″ (last piece might be shorter to balance bd.ft total)
Widths: 4″ and wider
Thickness: 4/4 nominal

We S2S by default – surfaced thickness will be up to 1/4″ less than nominal thickness.
You can choose to get the lumber in the rough by selecting Machining = none and get an additional $20 off.

Note:
Lead time is 3 working days.
Ships free via UPS/USPS.

On Sale!
IVRED1009_1

$219.70

IVRED1009
0.8" x 10.5" x 46"

Max width 13″. Cracks and defects both faces

IVRED1029_1

$332.43

IVRED1029
1.3" x 7.5" x 56.25"

Max width 8″. Min width 7″. Hairline cracks on one face. Good face has minor end checks one end.

IVRED1030_1

$202.38

IVRED1030
1.3" x 6" x 37.5"

Max width 8″. Min width 6.5″. Defects one end. Checking at other end.

IVRED1015_1

$287.29

IVRED1015
1.3" x 6" x 62"

Max width 7″. Min 6″. Some checks through center of board

WOOD OF THE WEEK

15% off - this week only

Wenge
Wenge Lumber @ Rare Woods USA

Wenge is unique among the world’s exotic woods. This tough tropical wood’s distinctive deep chocolate color — which can sometimes augmented by muted gold, orange, red or even burgundy tint — is actually known as “Wenge” in the color spectrum nomenclature of various parts of the world (with paint manufacturers, etc.). Its grains are generally straight (though sometimes wavy or irregular) and are accenuated by overlapping black lines which typically decorate the board’s surface.

While being considered a strong, durable wood, Wenge’s course, rugged texture makes it very splintery — making some craftsmen hesitant to use it. It can be difficult to work, although is glues well and is considered a very dimensionally stable species.

Exercise caution when working with this wood. Its splinters can be like little razors and when one pentetrates the skin, it is quite painful and the area can quickly and easily get infected, if quick action isn’t taken to remove it (the splinter) and sterilize the area.

Although most sources consider Wenge to be a dull wood with poor natural luster, our experience has revealed that a deep, glossy luster can sometimes emerge through fine-grit sanding of flatsawn boards. Its combination of relatively light weight, rot & insect resistance and impressive tensil strength has yielded the wood to a variety of indoor and outdoor uses, being particularly well suited for flooring in heavy traffic areas.

Wenge Lumber @ Rare Woods USA
Main Color GroupDark Brown
Grain Pattern Pronounced
Avg Dry Weight - LB/BF4.5
Avg Dry Weight - KG/M3870
Janka Hardness - LBF1930
Janka Hardness - N8600
0
    0
    Your Cart
    Your cart is emptyReturn to Shop