Shopping Cart

Page not found

BROWSE THOUSANDS OF LUMBER PRODUCTS

Individual Pieces
PEARSW1158_1

$50.76

PEARSW1158
0.88" x 9.5" x 40"

Crack,Skip planed,Edge defect

LEADW1038_1

$103.05

LEADW1038
0.88" x 13.75" x 38.19"

Cracks. Knots.

BWAC1158_1

$32.08

BWAC1158
0.94" x 7.38" x 42.13"

Planer burn,Small surface cracks

ROSEEI1140_1

$51.83

ROSEEI1140
1" x 5" x 37.13"

Clean

ROSENIC1058_1

$75.40

ROSENIC1058
.94" x 3.88" x 49.31"

Nice board.

Pre-cut Sizes
SIDEROSEEI0081_1

$51.26

SIDEROSEEI0081
.2" x 4.25" x 30.44"

Clear

SIDEROSEEI0240_1

$45.00

SIDEROSEEI0240
0.2" x 5.38" x 34.5"

Clear.

turncedrorana-2

$3.00

CEDRO_1.5X1.5X21_EA
1.5" x 1.5" x 21"

Our Cedrorana/Tornillo turning squares are good quality 1.5×1.5×21 spindles.

You get discounts at 5, 10 and 20 pieces.

The photographs are representative of the stock you will receive.  You won’t typically received surfaced blanks, but we surface a few on the photographs to give you an idea of what the lumber looks like.

FINGERYELHT_1

$20.00

FINGERYELLOWHT1001
0.3" x 3" x 21"

Yellowheart Fingerboard

21″ x 3″ x 0.30″ (minimum)

Manufactured with luthiers in mind, but excellent blanks for box-making and other smaller items

Photographs are representative of what you will receive

If you have a strict dimensional requirement, please contact us to confirm we select the correct dimensions for you.

Lumber Packs
projmapbew1flf

$247.00

PROJMAPBEHLFW1F1001
1" x 4" x 48"

20 BF Low-Medium Figure Birdseye Maple W1F project pack

Figure: Low-Medium
Color: White 1 Face and Better
Lengths: 60″-92″ (last piece might be shorter to balance bd.ft total)
Widths: 4″ and wider
Thickness: 4/4 nominal

We S2S by default – surfaced thickness will be up to 1/4″ less than nominal thickness.
You can choose to get the lumber in the rough by selecting Machining = none and get an additional $20 off.

Note:
Lead time on rough lumber is 2 working days.
Lead time on S2S is 3 working days.
Ships free via UPS/USPS.

projcedalas1024

$313.00$351.00

PROJCEDALAS1001
" x " x "

20 BF Alaskan Yellow Cedar project pack

Lengths: 48″-92″ (last piece might be shorter to balance BF total)
Widths: 3″ and wider
Thickness: Choose 4/4 or 8/4 lumber or 8/4 Vertical grain lumber.

We S2S by default – surfaced thickness will be up to 1/4″ less than nominal thickness.
You can choose to get the lumber in the rough by selecting Machining = none and get an additional $20 off.

Note:
Lead time is 3 working days.
Ships free via UPS/USPS.

projmogaf1024

PROJMOGAFR1001

20 BF African Mahogany project pack

Lengths: 60″-92″ (last piece might be shorter to balance BF total)
Widths: 4″ and wider
Thickness: Choose 4/4, 6/4 or 8/4 nominal

We S2S by default – surfaced thickness will be up to 1/4″ less than nominal thickness.
You can choose to get the lumber in the rough by selecting Machining = none and get an additional $20 off.

Note:
Lead time is 3 working days.
Ships free via UPS/USPS.

projebamara1024

$850.00

PROJEBAMARA1001
1" x 4" x 48"

20 BF Amara Ebony project pack

Lengths: 48″-92″ (last piece might be shorter to balance bd.ft total)
Widths: 3″ and wider
Thickness: 4/4 nominal

We S2S by default – surfaced thickness will be up to 1/4″ less than nominal thickness.
You can choose to get the lumber in the rough by selecting Machining = none and get an additional $20 off.

Note:
Lead time is 3 working days.
Ships free via UPS/USPS.

On Sale!
IVRED1009_1

$219.70

IVRED1009
0.8" x 10.5" x 46"

Max width 13″. Cracks and defects both faces

IVRED1032_1

$359.00

IVRED1032
1.25" x 9.5" x 45.5"

Open pith and defects both sides.

IVRED1024_1

$283.75

IVRED1024
1.3" x 7" x 54.25"

Max width 9″. Min width 6.5″. Hairline cracks on sappy face. One large defect with hairline crack on good face

IVRED1031_1

$596.95

IVRED1031
2.75" x 8" x 54.75"

Surface checks in sapwood. End checks and pith one side.

WOOD OF THE WEEK

15% off - this week only

Wenge
Wenge Lumber @ Rare Woods USA

Wenge is unique among the world’s exotic woods. This tough tropical wood’s distinctive deep chocolate color — which can sometimes augmented by muted gold, orange, red or even burgundy tint — is actually known as “Wenge” in the color spectrum nomenclature of various parts of the world (with paint manufacturers, etc.). Its grains are generally straight (though sometimes wavy or irregular) and are accenuated by overlapping black lines which typically decorate the board’s surface.

While being considered a strong, durable wood, Wenge’s course, rugged texture makes it very splintery — making some craftsmen hesitant to use it. It can be difficult to work, although is glues well and is considered a very dimensionally stable species.

Exercise caution when working with this wood. Its splinters can be like little razors and when one pentetrates the skin, it is quite painful and the area can quickly and easily get infected, if quick action isn’t taken to remove it (the splinter) and sterilize the area.

Although most sources consider Wenge to be a dull wood with poor natural luster, our experience has revealed that a deep, glossy luster can sometimes emerge through fine-grit sanding of flatsawn boards. Its combination of relatively light weight, rot & insect resistance and impressive tensil strength has yielded the wood to a variety of indoor and outdoor uses, being particularly well suited for flooring in heavy traffic areas.

Wenge Lumber @ Rare Woods USA
Main Color GroupDark Brown
Grain Pattern Pronounced
Avg Dry Weight - LB/BF4.5
Avg Dry Weight - KG/M3870
Janka Hardness - LBF1930
Janka Hardness - N8600
0
    0
    Your Cart
    Your cart is emptyReturn to Shop