Shopping Cart

Page not found

BROWSE THOUSANDS OF LUMBER PRODUCTS

Individual Pieces
BEECHAM1048_1

$22.90

BEECHAM1048
1.19" x 6.13" x 47.81"

Checks. Cracks. Bark inclusion. Knot on edge.

KIAAT1173_1

$34.80

KIAAT1173
1" x 7.06" x 41.75"

Edge defect,Skip planed

CEDARARO1086_1

$32.04

CEDARARO1086
0.94" x 8" x 51.13"

Surface defect,Knots

BOC1432_1

$40.10

BOC1432
0.81" x 5.06" x 29.88"

Nice board.

JELUT1198_1

$42.48

JELUT1198
1.06" x 12.06" x 40"

Edge defect,Small bark inclusions

Pre-cut Sizes
SIDEROSEEI0088_1

$51.04

SIDEROSEEI0088
.2" x 4.31" x 30.25"

Clear.

turnpalmyra-2

TURNPALM1001

Our Palmyra turning squares come in two sizes.

he photographs are representative of the stock you will receive.

turnziri-1

TURNZIRI1001

Our Ziricote turning squares come in range of sizes and are excellent quality lumber.

The sizes are all rough-guides, but are basically accurate.

If you have very strict size criteria, please just drop us an email to confirm they will meet your expectations.

The photographs are representative of the stock you will receive.  You won’t typically received surfaced blanks, but we surface a few on the photographs to give you an idea of what the lumber looks like.

LIGVITA1011_1

$61.44

LIGVITA1011
2.88" x 2.81" x 16.88"

Large defect.

Lumber Packs
bubinga-7v2

$460.00$480.00

PROJBUB1001
" x " x "

20 BF Bubinga project pack

Lengths: 60″-92″ (last piece might be shorter to balance BF total)
Widths: 4″ and wider
Thickness: Choose 4/4, 5/4, 6/4 or 8/4 nominal

We S2S by default – surfaced thickness will be up to 1/4″ less than nominal thickness.
You can choose to get the lumber in the rough by selecting Machining = none and get an additional $20 off.

Note:
Lead time is 3 working days.
Ships free via UPS/USPS.

KINGB1315-9-1

$1,632.04

KINGB1315
7" x 7" x 71"

Stunning Kingwood Boule – sold as one
All pieces are from the same log, so book-matched.
Sold individually pieces would cost over $1600.  Now on special for $1200

NB: Boule width tapers from 5.75″-5.25″

PIECELENWIDTHILBGRDNOTES
KINGB1315A695.51.0015.65ABLovely board
KINGB1315B695.51.0014.65ABHeart defect one face
KINGB1315C695.5  1.25 17.65CHeart defect
KINGB1315D695.5  1.00  14.65ABeautiful
KINGB1315E695.5 0.90  13.55ABThickness tapers to .75″
projwalnut1024

$350.00$370.00

PROJWALNAM1001
" x " x "

20 BF American Walnut project pack

Lengths: 48″-92″ (last piece might be shorter to balance BF total)
Widths: 4″ and wider
Thickness: Choose 4/4, 6/4 or 8/4

We S2S by default – surfaced thickness will be up to 1/4″ less than nominal thickness.
You can choose to get the lumber in the rough by selecting Machining = none and get an additional $20 off.

Note:
Lead time is 3 working days.
Ships free via UPS/USPS.

projwenge1024

$461.00$480.00

PROJWENGE1001
" x " x "

20 BF Wenge project pack

Lengths: 60″-92″ (last piece might be shorter to balance BF total)
Widths: 4″ and wider
Thickness: Choose 4/4, 5/4 Unsteamed, 6/4 or 8/4 nominal

We S2S by default – surfaced thickness will be up to 1/4″ less than nominal thickness.
You can choose to get the lumber in the rough by selecting Machining = none and get an additional $20 off.

Note:
Lead time on rough lumber is 2 working days.
Lead time on S2S is 3 working days.
Ships free via UPS/USPS.

On Sale!
IVRED1022_1

$168.37

IVRED1022
1.55" x 5" x 33.75"

Max width 7.5″. Min width 4″. End checks. Mostly sap on reverse face

IVRED1015_1

$287.29

IVRED1015
1.3" x 6" x 62"

Max width 7″. Min 6″. Some checks through center of board

KINGB190

$1,700.00

KINGB190
6" x 7" x 62"

Stunning Kingwood Boule – sold as one
All pieces are from the same log, so book-matched.
Sold individually pieces would cost almost $1900.  Now on special for $1700

PIECELENWIDTHILBGRDNOTES
KINGB190A            60.75           5.50              1.00              5.4ANice Board.
KINGB190B            60.5           6.50              1.06              6.5A6″ crack on end.
KINGB190C            61.0           7.00              2.25            10.6CRustic.
KINGB190D            60.5           6.00              1.00              6.2ASmall crack on end.

 

IVRED1028_1

$276.10

IVRED1028
1.3" x 7" x 56"

Max width 8″. Min width 6.25″. Large defect one end. Good face has 2 small knots. Defects on reverse face

WOOD OF THE WEEK

15% off - this week only

Wenge
Wenge Lumber @ Rare Woods USA

Wenge is unique among the world’s exotic woods. This tough tropical wood’s distinctive deep chocolate color — which can sometimes augmented by muted gold, orange, red or even burgundy tint — is actually known as “Wenge” in the color spectrum nomenclature of various parts of the world (with paint manufacturers, etc.). Its grains are generally straight (though sometimes wavy or irregular) and are accenuated by overlapping black lines which typically decorate the board’s surface.

While being considered a strong, durable wood, Wenge’s course, rugged texture makes it very splintery — making some craftsmen hesitant to use it. It can be difficult to work, although is glues well and is considered a very dimensionally stable species.

Exercise caution when working with this wood. Its splinters can be like little razors and when one pentetrates the skin, it is quite painful and the area can quickly and easily get infected, if quick action isn’t taken to remove it (the splinter) and sterilize the area.

Although most sources consider Wenge to be a dull wood with poor natural luster, our experience has revealed that a deep, glossy luster can sometimes emerge through fine-grit sanding of flatsawn boards. Its combination of relatively light weight, rot & insect resistance and impressive tensil strength has yielded the wood to a variety of indoor and outdoor uses, being particularly well suited for flooring in heavy traffic areas.

Wenge Lumber @ Rare Woods USA
Main Color GroupDark Brown
Grain Pattern Pronounced
Avg Dry Weight - LB/BF4.5
Avg Dry Weight - KG/M3870
Janka Hardness - LBF1930
Janka Hardness - N8600
0
    0
    Your Cart
    Your cart is emptyReturn to Shop