Shopping Cart

Page not found

BROWSE THOUSANDS OF LUMBER PRODUCTS

Individual Pieces
LIMBAW1027_1

$82.13

LIMBAW1027
0.94" x 11" x 44.94"

Clear.

WALNAM1553_1

$39.92

WALNAM1553
0.88" x 5.31" x 49.13"

Knot with defects. Skip planed patch. Nice color.

ASH1230_1

$40.50

ASH1230
0.94" x 9" x 48.06"

Bark inclusion.

ROSEEI1115_1

$35.55

ROSEEI1115
0.94" x 3.44" x 37.25"

Bark inclusion.

KING1117_1

$37.54

KING1117
0.94" x 3" x 34.94"

Cracks,Surface defect

Pre-cut Sizes
SPRUCETHINS1001_2

$36.00$60.00

SPRUCEENGSB
" x " x "

Beautiful quarter-sawn Engelmann Spruce Sound Boards – 10 piece pack.

Gorgeous for musos and model makers…

Thickness: 3/8″

Length and Widths: Various available (select from dropdown)

Each pack consists of 10 pieces and Widths and Lengths mentioned are a minimum rather than an exact measure.

The photographs are representative of the stock you will receive.

LIGVITA1009_1

$48.38

LIGVITA1009
2.88" x 3" x 10.25"

Crack.

LIGVITA1067_1

$43.20

LIGVITA1067
2.88" x 2.88" x 9.31"

Cracks. Defect on edge.

OLIVEWSQB2007_1

$60.00

OLIVEWSQB2007
1.5" x 1.5" x 12"

10-piece pack: B Grade Wild Olive Turning Squares.Rough Dimensions: 1.5×1.5×12″50% cheaper than our A grade price.Pieces WILL have wane, sap, cracks, knots present and/or be of lower color quality.We photograph all 4 sides of each piece/pack. What you see is what you get.

Lumber Packs
projwalnut1024

$350.00$370.00

PROJWALNAM1001
" x " x "

20 BF American Walnut project pack

Lengths: 48″-92″ (last piece might be shorter to balance BF total)
Widths: 4″ and wider
Thickness: Choose 4/4, 6/4 or 8/4

We S2S by default – surfaced thickness will be up to 1/4″ less than nominal thickness.
You can choose to get the lumber in the rough by selecting Machining = none and get an additional $20 off.

Note:
Lead time is 3 working days.
Ships free via UPS/USPS.

projmapbeh2hhf1024

$361.00

PROJMAPBEHHFBR1001
1" x 4" x 48"

20 BF Medium-Heavy Figure Birdseye Maple – Heart two faces (Brown) project pack

Figure: Medium-Heavy
Color: Some brown/heart on both faces and/or higher figured face
Lengths: 60″-92″ (last piece might be shorter to balance bd.ft total)
Widths: 4″ and wider
Thickness: 4/4 nominal

We S2S by default – surfaced thickness will be up to 1/4″ less than nominal thickness.
You can choose to get the lumber in the rough by selecting Machining = none and get an additional $20 off.

Note:
Lead time on rough lumber is 2 working days.
Lead time on S2S is 3 working days.
Ships free via UPS/USPS.

LEOPARD_20bf

$320.00

PROJLEOP1001
1" x 4" x 48"

20 BF Leopardwood project pack

Flecking: More scaly than lace’y (Unfortunately our stock is cut flat rather than QS, so flecking is not as pronounced as on QS stock – picture is indicative of our stock)
Lengths: 48″-92″ (last piece might be shorter to balance bd.ft total)
Widths: 4″ and wider
Thickness: 4/4 nominal

We S2S by default – surfaced thickness will be up to 1/4″ less than nominal thickness. (image is of S2S boards)
You can choose to get the lumber in the rough by selecting Machining = none and get an additional $20 off.
a
Note:
Lead time is 3 working days.
Ships free via UPS/USPS.

projebamara1024

$850.00

PROJEBAMARA1001
1" x 4" x 48"

20 BF Amara Ebony project pack

Lengths: 48″-92″ (last piece might be shorter to balance bd.ft total)
Widths: 3″ and wider
Thickness: 4/4 nominal

We S2S by default – surfaced thickness will be up to 1/4″ less than nominal thickness.
You can choose to get the lumber in the rough by selecting Machining = none and get an additional $20 off.

Note:
Lead time is 3 working days.
Ships free via UPS/USPS.

On Sale!
IVRED1028_1

$276.10

IVRED1028
1.3" x 7" x 56"

Max width 8″. Min width 6.25″. Large defect one end. Good face has 2 small knots. Defects on reverse face

IVRED1032_1

$359.00

IVRED1032
1.25" x 9.5" x 45.5"

Open pith and defects both sides.

IVRED1031_1

$596.95

IVRED1031
2.75" x 8" x 54.75"

Surface checks in sapwood. End checks and pith one side.

IVRED1009_1

$219.70

IVRED1009
0.8" x 10.5" x 46"

Max width 13″. Cracks and defects both faces

WOOD OF THE WEEK

15% off - this week only

Wenge
Wenge Lumber @ Rare Woods USA

Wenge is unique among the world’s exotic woods. This tough tropical wood’s distinctive deep chocolate color — which can sometimes augmented by muted gold, orange, red or even burgundy tint — is actually known as “Wenge” in the color spectrum nomenclature of various parts of the world (with paint manufacturers, etc.). Its grains are generally straight (though sometimes wavy or irregular) and are accenuated by overlapping black lines which typically decorate the board’s surface.

While being considered a strong, durable wood, Wenge’s course, rugged texture makes it very splintery — making some craftsmen hesitant to use it. It can be difficult to work, although is glues well and is considered a very dimensionally stable species.

Exercise caution when working with this wood. Its splinters can be like little razors and when one pentetrates the skin, it is quite painful and the area can quickly and easily get infected, if quick action isn’t taken to remove it (the splinter) and sterilize the area.

Although most sources consider Wenge to be a dull wood with poor natural luster, our experience has revealed that a deep, glossy luster can sometimes emerge through fine-grit sanding of flatsawn boards. Its combination of relatively light weight, rot & insect resistance and impressive tensil strength has yielded the wood to a variety of indoor and outdoor uses, being particularly well suited for flooring in heavy traffic areas.

Wenge Lumber @ Rare Woods USA
Main Color GroupDark Brown
Grain Pattern Pronounced
Avg Dry Weight - LB/BF4.5
Avg Dry Weight - KG/M3870
Janka Hardness - LBF1930
Janka Hardness - N8600
0
    0
    Your Cart
    Your cart is emptyReturn to Shop