Shopping Cart

Page not found

BROWSE THOUSANDS OF LUMBER PRODUCTS

Individual Pieces
MAPBEH1354_1

$40.74

MAPBEH1354
0.94" x 6.5" x 46.63"

Skip planed.

BUTTER1144_1

$28.49

BUTTER1144
1" x 8.63" x 48.63"

Crack,Bark inclusion,Edge defect

CANAR1141_1

$27.78

CANAR1141
0.88" x 5.25" x 32.69"

Nice board.

PADAUK1538_1

$50.99

PADAUK1538
0.94" x 5.88" x 61"

Crack. Worm tracks.

PAUFER1196_1

$61.75

PAUFER1196
1" x 5.81" x 53.81"

Crack. Defect on edge. Skip planed.

Pre-cut Sizes
LIGVITA1004_1

$45.06

LIGVITA1004
3" x 3" x 8.75"

End checks.

FINGERBUB1001_1

$12.00

FINGERBUB1001
0.3" x 3" x 21"

Bubinga Fingerboard

21″ x 3.0″ x 0.30″ (minimum)

Manufactured with luthiers in mind, but excellent blanks for box-making and other smaller items

Photographs are representative of what you will receive

BLAFCLARSET_1

$85.00

CLARBLAF1001
5" x 5" x 12"

African Blackwood Clarinet Set – Instrument Grade.

Bells : Height = 5″, Base diameter = +- 3.25″, Top diameter = +-1.5″

Lower Joints: 1.38 x 1.38 x 10.6

Upper Joints: 1.5 x 1.5 x 9.6

Barrels: 1.5 x 1.5 x 3.5

Photo representat the pieces you will receive.

SIDEROSEEI0347_1

$45.00

SIDEROSEEI0347
0.2" x 4.5" x 32"

Clear.

Lumber Packs
KINGB1011_5

$1,554.39

KINGB1011
6" x 7" x 44"

Stunning Kingwood Boule – sold as one
All pieces are from the same log, so book-matched.
Sold individually pieces would cost over $1500.  Now on special for $1150

PIECELENWIDTHILBGRDNOTES
KINGB1101A4450.908.8AWane, sapwood
KINGB1101B4461.0012ANice
KINGB1101C4471.7521ABEnd split
KINGB1101D446.51.0012ASolid
KINGB1101E445.51.0010AWane, sapwood
cherrycurly20bf

$280.00

PROJCHERRCUR1001
1" x 4" x 48"

20 BF Curly Cherry project pack

Lengths: 48″-92″ (last piece might be shorter to balance bd.ft total)
Widths: 4″ and wider
Thickness: 4/4 nominal
Grade: 1 common + better

We S2S by default – surfaced thickness will be up to 1/4″ less than nominal thickness. (image is of S2S boards)
You can choose to get the lumber in the rough by selecting Machining = none and get an additional $20 off.

Note:
Lead time is 3 working days.
Ships free via UPS/USPS.

projcanary1024

$380.00

PROJCANAR1001
" x " x "

20 BF Canarywood project pack

Lengths: 48″-92″ (last piece might be shorter to balance BF total)
Widths: 3″ and wider
Thickness: Choose 4/4 or 8/4 nominal

We S2S by default – surfaced thickness will be up to 1/4″ less than nominal thickness.
You can choose to get the lumber in the rough by selecting Machining = none and get an additional $20 off.

Note:
Lead time is 3 working days.
Ships free via UPS/USPS.

sassafras20bf

$180.00

PROJSASS1001
1" x 4" x 48"

20 BF Sassafras project pack

Lengths: 48″-92″ (last piece might be shorter to balance bd.ft total)
Widths: 4″ and wider
Thickness: 4/4 nominal
Grade: 1 common + better

We S2S by default – surfaced thickness will be up to 1/4″ less than nominal thickness. (image is of S2S boards)
You can choose to get the lumber in the rough by selecting Machining = none and get an additional $20 off.

Note:
Lead time is 3 working days.
Ships free via UPS/USPS.

On Sale!
IVRED1015_1

$287.29

IVRED1015
1.3" x 6" x 62"

Max width 7″. Min 6″. Some checks through center of board

IVRED1014_1

$246.89

IVRED1014
1.3" x 7" x 53.25"

Min width 5.5″. Max width 7.5″. Heart checks. Small tight knots

IVRED1022_1

$168.37

IVRED1022
1.55" x 5" x 33.75"

Max width 7.5″. Min width 4″. End checks. Mostly sap on reverse face

IVRED1031_1

$596.95

IVRED1031
2.75" x 8" x 54.75"

Surface checks in sapwood. End checks and pith one side.

WOOD OF THE WEEK

15% off - this week only

Wenge
Wenge Lumber @ Rare Woods USA

Wenge is unique among the world’s exotic woods. This tough tropical wood’s distinctive deep chocolate color — which can sometimes augmented by muted gold, orange, red or even burgundy tint — is actually known as “Wenge” in the color spectrum nomenclature of various parts of the world (with paint manufacturers, etc.). Its grains are generally straight (though sometimes wavy or irregular) and are accenuated by overlapping black lines which typically decorate the board’s surface.

While being considered a strong, durable wood, Wenge’s course, rugged texture makes it very splintery — making some craftsmen hesitant to use it. It can be difficult to work, although is glues well and is considered a very dimensionally stable species.

Exercise caution when working with this wood. Its splinters can be like little razors and when one pentetrates the skin, it is quite painful and the area can quickly and easily get infected, if quick action isn’t taken to remove it (the splinter) and sterilize the area.

Although most sources consider Wenge to be a dull wood with poor natural luster, our experience has revealed that a deep, glossy luster can sometimes emerge through fine-grit sanding of flatsawn boards. Its combination of relatively light weight, rot & insect resistance and impressive tensil strength has yielded the wood to a variety of indoor and outdoor uses, being particularly well suited for flooring in heavy traffic areas.

Wenge Lumber @ Rare Woods USA
Main Color GroupDark Brown
Grain Pattern Pronounced
Avg Dry Weight - LB/BF4.5
Avg Dry Weight - KG/M3870
Janka Hardness - LBF1930
Janka Hardness - N8600
0
    0
    Your Cart
    Your cart is emptyReturn to Shop