Shopping Cart

Page not found

BROWSE THOUSANDS OF LUMBER PRODUCTS

Individual Pieces
COCO1244_1

$229.30

COCO1244
1.94" x 3.5" x 48.06"

Wormhole

BLW1167_1

$32.41

BLW1167
0.94" x 4.06" x 39.31"

Skip planed. Small knots.

BUB1205_1

$92.97

BUB1205
1" x 11.13" x 41.75"

Skip planed,Surface defect

ROSESANT1035_1

$98.58

ROSESANT1035
1.56" x 9.75" x 55.38"

Checks. Cracks. Defects on surfaces.

CHERRCUR1161_1

$48.57

CHERRCUR1161
1" x 6.75" x 54.5"

Skip planed

Pre-cut Sizes
SIDEROSEEI0240_1

$45.00

SIDEROSEEI0240
0.2" x 5.38" x 34.5"

Clear.

SIDEROSEEI0088_1

$51.04

SIDEROSEEI0088
.2" x 4.31" x 30.25"

Clear.

IVREDSQB1015_1

$70.00

IVREDSQB1015
2" x 2" x 12"

4-piece pack: B Grade Pink Ivory Turning Squares.

Rough Dimensions: 2.0×2.0x12″50% cheaper than our A grade price.

Pieces might have wane, sap, cracks present and/or be of lower color quality.

We photograph all 4 sides of each piece/pack.

What you see is what you get.

KINGSQB2004_1

$45.00

KINGSQB2004
1.5" x 1.5" x 12"

6-piece pack: B Grade Kingwood Turning Squares.Rough Dimensions: 1.5×1.5×12″50% cheaper than our A grade price.Pieces might have wane, sap, cracks present and/or be of lower color quality.We photograph all 4 sides of each piece/pack. What you see is what you get.

Lumber Packs
projmogaf1024

PROJMOGAFR1001

20 BF African Mahogany project pack

Lengths: 60″-92″ (last piece might be shorter to balance BF total)
Widths: 4″ and wider
Thickness: Choose 4/4, 6/4 or 8/4 nominal

We S2S by default – surfaced thickness will be up to 1/4″ less than nominal thickness.
You can choose to get the lumber in the rough by selecting Machining = none and get an additional $20 off.

Note:
Lead time is 3 working days.
Ships free via UPS/USPS.

projavo1024

$210.00

PROJAVO1001
1" x 4" x 48"

20 BF Avodire project pack

Lengths: 48″-92″ (last piece might be shorter to balance bd.ft total)
Widths: 4″ and wider
Thickness: 4/4 nominal

We S2S by default – surfaced thickness will be up to 1/4″ less than nominal thickness. (image is of S2S boards)
You can choose to get the lumber in the rough by selecting Machining = none and get an additional $20 off.

Note:
Lead time is 3 working days.
Ships free via UPS/USPS.

KINGB186_2

$1,750.00

KINGB186
6" x 7" x 56"

Stunning Kingwood Boule – sold as one
All pieces are from the same log, so book-matched.
Sold individually pieces would cost over $2000.  Now on special for $1750

PIECELENWIDTHILBGRDNOTES
KINGB186A            56.0              6.5              1.0              5.4ASolid, no checks.
KINGB186B            56.0              7.3              0.9              6.5AWidest point 8”.
KINGB186C            56.0              7.8              1.4            10.6ABCracks on ends.
KINGB186D            56.0              7.3              1.0              6.2AWidest point 8”. Check one end.
KINGB186E            56.0              5.8              1.0            12.2AClear two face.
LEOPARD_20bf

$320.00

PROJLEOP1001
1" x 4" x 48"

20 BF Leopardwood project pack

Flecking: More scaly than lace’y (Unfortunately our stock is cut flat rather than QS, so flecking is not as pronounced as on QS stock – picture is indicative of our stock)
Lengths: 48″-92″ (last piece might be shorter to balance bd.ft total)
Widths: 4″ and wider
Thickness: 4/4 nominal

We S2S by default – surfaced thickness will be up to 1/4″ less than nominal thickness. (image is of S2S boards)
You can choose to get the lumber in the rough by selecting Machining = none and get an additional $20 off.
a
Note:
Lead time is 3 working days.
Ships free via UPS/USPS.

On Sale!
IVRED1031_1

$596.95

IVRED1031
2.75" x 8" x 54.75"

Surface checks in sapwood. End checks and pith one side.

IVRED1024_1

$283.75

IVRED1024
1.3" x 7" x 54.25"

Max width 9″. Min width 6.5″. Hairline cracks on sappy face. One large defect with hairline crack on good face

IVRED1021_1

$182.21

IVRED1021
1.3" x 5" x 50.5"

Max width 5.5″. Min width 3.25″. Sap cracks.

IVRED1032_1

$359.00

IVRED1032
1.25" x 9.5" x 45.5"

Open pith and defects both sides.

WOOD OF THE WEEK

15% off - this week only

Wenge
Wenge Lumber @ Rare Woods USA

Wenge is unique among the world’s exotic woods. This tough tropical wood’s distinctive deep chocolate color — which can sometimes augmented by muted gold, orange, red or even burgundy tint — is actually known as “Wenge” in the color spectrum nomenclature of various parts of the world (with paint manufacturers, etc.). Its grains are generally straight (though sometimes wavy or irregular) and are accenuated by overlapping black lines which typically decorate the board’s surface.

While being considered a strong, durable wood, Wenge’s course, rugged texture makes it very splintery — making some craftsmen hesitant to use it. It can be difficult to work, although is glues well and is considered a very dimensionally stable species.

Exercise caution when working with this wood. Its splinters can be like little razors and when one pentetrates the skin, it is quite painful and the area can quickly and easily get infected, if quick action isn’t taken to remove it (the splinter) and sterilize the area.

Although most sources consider Wenge to be a dull wood with poor natural luster, our experience has revealed that a deep, glossy luster can sometimes emerge through fine-grit sanding of flatsawn boards. Its combination of relatively light weight, rot & insect resistance and impressive tensil strength has yielded the wood to a variety of indoor and outdoor uses, being particularly well suited for flooring in heavy traffic areas.

Wenge Lumber @ Rare Woods USA
Main Color GroupDark Brown
Grain Pattern Pronounced
Avg Dry Weight - LB/BF4.5
Avg Dry Weight - KG/M3870
Janka Hardness - LBF1930
Janka Hardness - N8600
0
    0
    Your Cart
    Your cart is emptyReturn to Shop