Shopping Cart

Page not found

BROWSE THOUSANDS OF LUMBER PRODUCTS

Individual Pieces
STINK1007_1

$112.22

STINK1007
1" x 8" x 56.5"

Cracks

MAPBEH1630_1

$38.16

MAPBEH1630
0.94" x 8.69" x 40.69"

Crack. Small knot.

OSORARG1065_1

$19.13

OSORARG1065
0.94" x 3.19" x 41"

Cracks. Small knots. Skip planed.

MAPCSR1201_1

$26.38

MAPCSR1201
0.94" x 6.88" x 40.5"

Cracks. Skip planed.

KOA1007_1

$45.76

KOA1007
1.44" x 3.06" x 29.94"

Nice board.

Pre-cut Sizes
FINGERROSEEI_1

$20.00

FINGERROSEEI1001
0.3" x 2.25" x 20"

East Indian Rosewood Fingerboard

20.0″ x 2.25-2.75″ (taper) x 0.30″ (within 0.3″ on length, width tapers)

Manufactured with luthiers in mind, but excellent blanks for box-making and other smaller items

Photographs are representative of what you will receive

If you have a strict dimensional requirement, please contact us to confirm we select the correct dimensions for you.

LIGVITA1009_1

$48.38

LIGVITA1009
2.88" x 3" x 10.25"

Crack.

FINGERMAPCURL1001_1

$15.00

FINGERMAPCURL1001
0.3" x 3" x 21"

Curly Maple Fingerboard

21″ x 3.0″ x 0.30″ (minimum)

Manufactured with luthiers in mind, but excellent blanks for box-making and other smaller items

Photographs are representative of what you will receive

IVREDSQB2005_1

$72.00

IVREDSQB2005
1.5" x 1.5" x 12"

6-piece pack: B Grade Pink Ivory Turning Squares.Rough Dimensions: 1.5×1.5×12″50% cheaper than our A grade price.Pieces might have wane, sap, cracks present and/or be of lower color quality.We photograph all 4 sides of each piece/pack. What you see is what you get.

Lumber Packs
projcedspan1024

PROJCEDSPAN1001

20 BF Spanish Cedar project pack

Lengths: 48″-92″ (last piece might be shorter to balance BF total)
Widths: 4″ and wider
Thickness: Choose 4/4 or 6/4 lumber.

We S2S by default – surfaced thickness will be up to 1/4″ less than nominal thickness.
You can choose to get the lumber in the rough by selecting Machining = none and get an additional $20 off.

Note:
Lead time is 3 working days.
Ships free via UPS/USPS.

projwalnaf1024

$242.00$261.00

PROJWALNAFR1001
" x " x "

20 BF African Walnut project pack

Lengths: 48″-92″ (last piece might be shorter to balance BF total)
Widths: 4″ and wider
Thickness: Choose 4/4, 6/4 or 8/4 nominal

We S2S by default – surfaced thickness will be up to 1/4″ less than nominal thickness.
You can choose to get the lumber in the rough by selecting Machining = none and get an additional $20 off.

Note:
Lead time is 3 working days.
Ships free via UPS/USPS.

KINGB1315-9-1

$1,632.04

KINGB1315
7" x 7" x 71"

Stunning Kingwood Boule – sold as one
All pieces are from the same log, so book-matched.
Sold individually pieces would cost over $1600.  Now on special for $1200

NB: Boule width tapers from 5.75″-5.25″

PIECELENWIDTHILBGRDNOTES
KINGB1315A695.51.0015.65ABLovely board
KINGB1315B695.51.0014.65ABHeart defect one face
KINGB1315C695.5  1.25 17.65CHeart defect
KINGB1315D695.5  1.00  14.65ABeautiful
KINGB1315E695.5 0.90  13.55ABThickness tapers to .75″
projcedalas1024

$313.00$351.00

PROJCEDALAS1001
" x " x "

20 BF Alaskan Yellow Cedar project pack

Lengths: 48″-92″ (last piece might be shorter to balance BF total)
Widths: 3″ and wider
Thickness: Choose 4/4 or 8/4 lumber or 8/4 Vertical grain lumber.

We S2S by default – surfaced thickness will be up to 1/4″ less than nominal thickness.
You can choose to get the lumber in the rough by selecting Machining = none and get an additional $20 off.

Note:
Lead time is 3 working days.
Ships free via UPS/USPS.

On Sale!
KINGB186_2

$1,750.00

KINGB186
6" x 7" x 56"

Stunning Kingwood Boule – sold as one
All pieces are from the same log, so book-matched.
Sold individually pieces would cost over $2000.  Now on special for $1750

PIECELENWIDTHILBGRDNOTES
KINGB186A            56.0              6.5              1.0              5.4ASolid, no checks.
KINGB186B            56.0              7.3              0.9              6.5AWidest point 8”.
KINGB186C            56.0              7.8              1.4            10.6ABCracks on ends.
KINGB186D            56.0              7.3              1.0              6.2AWidest point 8”. Check one end.
KINGB186E            56.0              5.8              1.0            12.2AClear two face.
IVRED1029_1

$332.43

IVRED1029
1.3" x 7.5" x 56.25"

Max width 8″. Min width 7″. Hairline cracks on one face. Good face has minor end checks one end.

IVRED1031_1

$596.95

IVRED1031
2.75" x 8" x 54.75"

Surface checks in sapwood. End checks and pith one side.

IVRED1015_1

$287.29

IVRED1015
1.3" x 6" x 62"

Max width 7″. Min 6″. Some checks through center of board

WOOD OF THE WEEK

15% off - this week only

Wenge
Wenge Lumber @ Rare Woods USA

Wenge is unique among the world’s exotic woods. This tough tropical wood’s distinctive deep chocolate color — which can sometimes augmented by muted gold, orange, red or even burgundy tint — is actually known as “Wenge” in the color spectrum nomenclature of various parts of the world (with paint manufacturers, etc.). Its grains are generally straight (though sometimes wavy or irregular) and are accenuated by overlapping black lines which typically decorate the board’s surface.

While being considered a strong, durable wood, Wenge’s course, rugged texture makes it very splintery — making some craftsmen hesitant to use it. It can be difficult to work, although is glues well and is considered a very dimensionally stable species.

Exercise caution when working with this wood. Its splinters can be like little razors and when one pentetrates the skin, it is quite painful and the area can quickly and easily get infected, if quick action isn’t taken to remove it (the splinter) and sterilize the area.

Although most sources consider Wenge to be a dull wood with poor natural luster, our experience has revealed that a deep, glossy luster can sometimes emerge through fine-grit sanding of flatsawn boards. Its combination of relatively light weight, rot & insect resistance and impressive tensil strength has yielded the wood to a variety of indoor and outdoor uses, being particularly well suited for flooring in heavy traffic areas.

Wenge Lumber @ Rare Woods USA
Main Color GroupDark Brown
Grain Pattern Pronounced
Avg Dry Weight - LB/BF4.5
Avg Dry Weight - KG/M3870
Janka Hardness - LBF1930
Janka Hardness - N8600
0
    0
    Your Cart
    Your cart is emptyReturn to Shop