Shopping Cart

Page not found

BROWSE THOUSANDS OF LUMBER PRODUCTS

Individual Pieces
PAUFER1181_1

$60.85

PAUFER1181
0.88" x 6" x 54.38"

Crack. Defect on edge.

MARBLE1257_1

$27.81

MARBLE1257
0.81" x 4.31" x 36.69"

Cracks.

KIAAT1156_1

$47.56

KIAAT1156
1" x 9.81" x 41.56"

Wormholes,Edge defect,Skip planed

ASH1190_1

$26.95

ASH1190
1.06" x 9.25" x 36.19"

Wormhole,Crack,Edge defect

PURP1411_1

$32.60

PURP1411
0.94" x 6.06" x 36.56"

Checks. Skip planed. Sapwood surface.

Pre-cut Sizes
blafbagpipes-2

$450.00

BAGPBLAF1001
10" x 10" x 15"

African Blackwood Bagpipe Set – Instrument Grade.

14 Pieces (metric mm / +- imperial inches):

1 of 54 x 54 x 305 /  2 x 2 x 12

2 of 51 x 51 x 205 / 2 x 2 x 8

1 of 38 x 38 x 385 / 1.5 x 1.5 x 15

1 of 47 x 47 x 310 / 2 x 2 x 12

1 of 47 x 47 x 195 / 2 x 2 x 8

2 of 47 x 47 x 160 / 2 x 2 x 6

1 of 47 x 47 x 125 / 2 x 2 x 5

1 of 47 x 47 x 115 / 2 x 2 x 4.5

1 of 38 x 38 x 310 / 1.5 x 1.5 x 12

1 of 38 x 38 x 245 / 1.5 x 1.5 x 10

2 of 38 x 38 x 220 / 1.5 x 1.5 x 9

turnpack02-2

$55.00

TURNPACK002
2" x 12" x 12"

East Indian Satinwood turning blanks

  • 5 x East Indian Satinwood: 12 x 2 x 2
  • 2 x East Indian Satinwood: 12 x 1 x 1

Any woodturners delight…!

Please note: we surfaced one edge on the samples to show how they will look. You won’t necessarily received surfaced blanks.

LIGVITA1028_1

$56.45

LIGVITA1028
3" x 2.88" x 12"

Check throughout.

LIGVITA1026_1

$51.84

LIGVITA1026
2.94" x 2.94" x 11.75"

Checks throughout.

Lumber Packs
projmogaf1024

PROJMOGAFR1001

20 BF African Mahogany project pack

Lengths: 60″-92″ (last piece might be shorter to balance BF total)
Widths: 4″ and wider
Thickness: Choose 4/4, 6/4 or 8/4 nominal

We S2S by default – surfaced thickness will be up to 1/4″ less than nominal thickness.
You can choose to get the lumber in the rough by selecting Machining = none and get an additional $20 off.

Note:
Lead time is 3 working days.
Ships free via UPS/USPS.

kiaat20bf

$320.00

PROJKIAAT1001
" x " x "

20 BF Kiaat project pack

Lengths: 60″-92″ (last piece might be shorter to balance BF total)
Widths: 4″ and wider
Thickness: Choose 4/4, 6/4 or 8/4 (nominal thickness)

We S2S by default – surfaced thickness will be up to 1/4″ less than nominal thickness.
You can choose to get the lumber in the rough by selecting Machining = none and get an additional $20 off.

Note:
Lead time is 3 working days.
Ships free via UPS/USPS.

projwenge1024

$461.00$480.00

PROJWENGE1001
" x " x "

20 BF Wenge project pack

Lengths: 60″-92″ (last piece might be shorter to balance BF total)
Widths: 4″ and wider
Thickness: Choose 4/4, 5/4 Unsteamed, 6/4 or 8/4 nominal

We S2S by default – surfaced thickness will be up to 1/4″ less than nominal thickness.
You can choose to get the lumber in the rough by selecting Machining = none and get an additional $20 off.

Note:
Lead time on rough lumber is 2 working days.
Lead time on S2S is 3 working days.
Ships free via UPS/USPS.

projmogbraz1024

$271.00$290.00

PROJMOGBRAZ1001
" x " x "

20 BF Genuine Mahogany project pack

Lengths: 60″-92″ (last piece might be shorter to balance BF total)
Widths: 4″ and wider
Thickness: Choose 4/4, 6/4 or 8/4 nominal

We S2S by default – surfaced thickness will be up to 1/4″ less than nominal thickness.
You can choose to get the lumber in the rough by selecting Machining = none and get an additional $20 off.

Note:
Lead time is 3 working days.
Ships free via UPS/USPS.

On Sale!
IVRED1030_1

$202.38

IVRED1030
1.3" x 6" x 37.5"

Max width 8″. Min width 6.5″. Defects one end. Checking at other end.

IVRED1031_1

$596.95

IVRED1031
2.75" x 8" x 54.75"

Surface checks in sapwood. End checks and pith one side.

IVRED1024_1

$283.75

IVRED1024
1.3" x 7" x 54.25"

Max width 9″. Min width 6.5″. Hairline cracks on sappy face. One large defect with hairline crack on good face

IVRED1032_1

$359.00

IVRED1032
1.25" x 9.5" x 45.5"

Open pith and defects both sides.

WOOD OF THE WEEK

15% off - this week only

Wenge
Wenge Lumber @ Rare Woods USA

Wenge is unique among the world’s exotic woods. This tough tropical wood’s distinctive deep chocolate color — which can sometimes augmented by muted gold, orange, red or even burgundy tint — is actually known as “Wenge” in the color spectrum nomenclature of various parts of the world (with paint manufacturers, etc.). Its grains are generally straight (though sometimes wavy or irregular) and are accenuated by overlapping black lines which typically decorate the board’s surface.

While being considered a strong, durable wood, Wenge’s course, rugged texture makes it very splintery — making some craftsmen hesitant to use it. It can be difficult to work, although is glues well and is considered a very dimensionally stable species.

Exercise caution when working with this wood. Its splinters can be like little razors and when one pentetrates the skin, it is quite painful and the area can quickly and easily get infected, if quick action isn’t taken to remove it (the splinter) and sterilize the area.

Although most sources consider Wenge to be a dull wood with poor natural luster, our experience has revealed that a deep, glossy luster can sometimes emerge through fine-grit sanding of flatsawn boards. Its combination of relatively light weight, rot & insect resistance and impressive tensil strength has yielded the wood to a variety of indoor and outdoor uses, being particularly well suited for flooring in heavy traffic areas.

Wenge Lumber @ Rare Woods USA
Main Color GroupDark Brown
Grain Pattern Pronounced
Avg Dry Weight - LB/BF4.5
Avg Dry Weight - KG/M3870
Janka Hardness - LBF1930
Janka Hardness - N8600
0
    0
    Your Cart
    Your cart is emptyReturn to Shop