Page not found
BROWSE THOUSANDS OF LUMBER PRODUCTS
Individual Pieces
Pre-cut Sizes
$45.00
Bookmatched Guitar Sides set
$12.00
Bubinga Fingerboard
21″ x 3.0″ x 0.30″ (minimum)
Manufactured with luthiers in mind, but excellent blanks for box-making and other smaller items
Photographs are representative of what you will receive
Lumber Packs
$350.00 – $370.00
20 BF American Walnut project pack
Lengths: 48″-92″ (last piece might be shorter to balance BF total)
Widths: 4″ and wider
Thickness: Choose 4/4, 6/4 or 8/4
We S2S by default – surfaced thickness will be up to 1/4″ less than nominal thickness.
You can choose to get the lumber in the rough by selecting Machining = none and get an additional $20 off.
Note:
Lead time is 3 working days.
Ships free via UPS/USPS.
$850.00
20 BF Amara Ebony project pack
Lengths: 48″-92″ (last piece might be shorter to balance bd.ft total)
Widths: 3″ and wider
Thickness: 4/4 nominal
We S2S by default – surfaced thickness will be up to 1/4″ less than nominal thickness.
You can choose to get the lumber in the rough by selecting Machining = none and get an additional $20 off.
Note:
Lead time is 3 working days.
Ships free via UPS/USPS.
$460.00 – $480.00
20 BF Bubinga project pack
Lengths: 60″-92″ (last piece might be shorter to balance BF total)
Widths: 4″ and wider
Thickness: Choose 4/4, 5/4, 6/4 or 8/4 nominal
We S2S by default – surfaced thickness will be up to 1/4″ less than nominal thickness.
You can choose to get the lumber in the rough by selecting Machining = none and get an additional $20 off.
Note:
Lead time is 3 working days.
Ships free via UPS/USPS.
$380.00
20 BF Chechen project pack
Lengths: 48″-92″ (last piece might be shorter to balance bd.ft total)
Widths: 4″ and wider
Thickness: 4/4 nominal
We S2S by default – surfaced thickness will be up to 1/4″ less than nominal thickness.
You can choose to get the lumber in the rough by selecting Machining = none and get an additional $20 off.
Note:
Lead time is 3 working days.
Ships free via UPS/USPS.
On Sale!
$394.43 $276.10
Max width 8″. Min width 6.25″. Large defect one end. Good face has 2 small knots. Defects on reverse face
$410.42 $287.29
Max width 7″. Min 6″. Some checks through center of board
$1,875.93 $1,700.00
Stunning Kingwood Boule – sold as one
All pieces are from the same log, so book-matched.
Sold individually pieces would cost almost $1900. Now on special for $1700
PIECE | LEN | WID | THI | LB | GRD | NOTES |
KINGB190A | 60.75 | 5.50 | 1.00 | 5.4 | A | Nice Board. |
KINGB190B | 60.5 | 6.50 | 1.06 | 6.5 | A | 6″ crack on end. |
KINGB190C | 61.0 | 7.00 | 2.25 | 10.6 | C | Rustic. |
KINGB190D | 60.5 | 6.00 | 1.00 | 6.2 | A | Small crack on end. |
$405.36 $283.75
Max width 9″. Min width 6.5″. Hairline cracks on sappy face. One large defect with hairline crack on good face
WOOD OF THE WEEK
15% off - this week only
Wenge is unique among the world’s exotic woods. This tough tropical wood’s distinctive deep chocolate color — which can sometimes augmented by muted gold, orange, red or even burgundy tint — is actually known as “Wenge” in the color spectrum nomenclature of various parts of the world (with paint manufacturers, etc.). Its grains are generally straight (though sometimes wavy or irregular) and are accenuated by overlapping black lines which typically decorate the board’s surface.
While being considered a strong, durable wood, Wenge’s course, rugged texture makes it very splintery — making some craftsmen hesitant to use it. It can be difficult to work, although is glues well and is considered a very dimensionally stable species.
Exercise caution when working with this wood. Its splinters can be like little razors and when one pentetrates the skin, it is quite painful and the area can quickly and easily get infected, if quick action isn’t taken to remove it (the splinter) and sterilize the area.
Although most sources consider Wenge to be a dull wood with poor natural luster, our experience has revealed that a deep, glossy luster can sometimes emerge through fine-grit sanding of flatsawn boards. Its combination of relatively light weight, rot & insect resistance and impressive tensil strength has yielded the wood to a variety of indoor and outdoor uses, being particularly well suited for flooring in heavy traffic areas.
Main Color Group | Dark Brown |
Grain Pattern | Pronounced |
Avg Dry Weight - LB/BF | 4.5 |
Avg Dry Weight - KG/M3 | 870 |
Janka Hardness - LBF | 1930 |
Janka Hardness - N | 8600 |