Page not found
BROWSE THOUSANDS OF LUMBER PRODUCTS
Individual Pieces
$26.40
Edge defect,Skip planed,Surface defect
Pre-cut Sizes
$24.00 – $35.00
Our Pink Ivory turning blanks come in range of sizes and are good quality lumber.
The sizes are all rough-guides, but are basically accurate.
If you have very strict size criteria, please just drop us an email to confirm they will meet your expectations.
The photographs are representative of the stock you will receive.
$60.00
10-piece pack: B Grade Wild Olive Turning Squares.Rough Dimensions: 1.5×1.5×12″50% cheaper than our A grade price.Pieces WILL have wane, sap, cracks, knots present and/or be of lower color quality.We photograph all 4 sides of each piece/pack. What you see is what you get.
Lumber Packs
$242.00 – $261.00
20 BF African Walnut project pack
Lengths: 48″-92″ (last piece might be shorter to balance BF total)
Widths: 4″ and wider
Thickness: Choose 4/4, 6/4 or 8/4 nominal
We S2S by default – surfaced thickness will be up to 1/4″ less than nominal thickness.
You can choose to get the lumber in the rough by selecting Machining = none and get an additional $20 off.
Note:
Lead time is 3 working days.
Ships free via UPS/USPS.
$461.00 – $480.00
20 BF Wenge project pack
Lengths: 60″-92″ (last piece might be shorter to balance BF total)
Widths: 4″ and wider
Thickness: Choose 4/4, 5/4 Unsteamed, 6/4 or 8/4 nominal
We S2S by default – surfaced thickness will be up to 1/4″ less than nominal thickness.
You can choose to get the lumber in the rough by selecting Machining = none and get an additional $20 off.
Note:
Lead time on rough lumber is 2 working days.
Lead time on S2S is 3 working days.
Ships free via UPS/USPS.
$1,554.39
Stunning Kingwood Boule – sold as one
All pieces are from the same log, so book-matched.
Sold individually pieces would cost over $1500. Now on special for $1150
PIECE | LEN | WID | THI | LB | GRD | NOTES |
KINGB1101A | 44 | 5 | 0.90 | 8.8 | A | Wane, sapwood |
KINGB1101B | 44 | 6 | 1.00 | 12 | A | Nice |
KINGB1101C | 44 | 7 | 1.75 | 21 | AB | End split |
KINGB1101D | 44 | 6.5 | 1.00 | 12 | A | Solid |
KINGB1101E | 44 | 5.5 | 1.00 | 10 | A | Wane, sapwood |
$460.00 – $480.00
20 BF Bubinga project pack
Lengths: 60″-92″ (last piece might be shorter to balance BF total)
Widths: 4″ and wider
Thickness: Choose 4/4, 5/4, 6/4 or 8/4 nominal
We S2S by default – surfaced thickness will be up to 1/4″ less than nominal thickness.
You can choose to get the lumber in the rough by selecting Machining = none and get an additional $20 off.
Note:
Lead time is 3 working days.
Ships free via UPS/USPS.
On Sale!
$474.90 $332.43
Max width 8″. Min width 7″. Hairline cracks on one face. Good face has minor end checks one end.
$410.42 $287.29
Max width 7″. Min 6″. Some checks through center of board
WOOD OF THE WEEK
15% off - this week only
Wenge is unique among the world’s exotic woods. This tough tropical wood’s distinctive deep chocolate color — which can sometimes augmented by muted gold, orange, red or even burgundy tint — is actually known as “Wenge” in the color spectrum nomenclature of various parts of the world (with paint manufacturers, etc.). Its grains are generally straight (though sometimes wavy or irregular) and are accenuated by overlapping black lines which typically decorate the board’s surface.
While being considered a strong, durable wood, Wenge’s course, rugged texture makes it very splintery — making some craftsmen hesitant to use it. It can be difficult to work, although is glues well and is considered a very dimensionally stable species.
Exercise caution when working with this wood. Its splinters can be like little razors and when one pentetrates the skin, it is quite painful and the area can quickly and easily get infected, if quick action isn’t taken to remove it (the splinter) and sterilize the area.
Although most sources consider Wenge to be a dull wood with poor natural luster, our experience has revealed that a deep, glossy luster can sometimes emerge through fine-grit sanding of flatsawn boards. Its combination of relatively light weight, rot & insect resistance and impressive tensil strength has yielded the wood to a variety of indoor and outdoor uses, being particularly well suited for flooring in heavy traffic areas.
Main Color Group | Dark Brown |
Grain Pattern | Pronounced |
Avg Dry Weight - LB/BF | 4.5 |
Avg Dry Weight - KG/M3 | 870 |
Janka Hardness - LBF | 1930 |
Janka Hardness - N | 8600 |