Shopping Cart

Page not found

BROWSE THOUSANDS OF LUMBER PRODUCTS

Individual Pieces
TEAKZAM1257_1

$34.24

TEAKZAM1257
0.94" x 4.69" x 48.5"

Bark inclusions. Nice figure.

WALNAF1101_1

$31.59

WALNAF1101
1.56" x 4.75" x 40.19"

Edge defect

ROSEAF1233_1

$37.13

ROSEAF1233
1" x 7" x 40.19"

Great board.

CERE1078_1

$21.42

CERE1078
1.44" x 4.88" x 32.56"

Edge defect

ROSEEI1231_1

$31.94

ROSEEI1231
1" x 2.94" x 38.19"

Nice board.

Pre-cut Sizes
IVREDSQB1004_1

$70.00

IVREDSQB1004
2" x 2" x 12"

4-piece pack: B Grade Pink Ivory Turning Squares.

Rough Dimensions: 2.0×2.0x12″

50% cheaper than our A grade price.

Pieces might have wane, sap, cracks present and/or be of lower color quality.

We photograph all 4 sides of each piece/pack.

What you see is what you get.

turnolivw-2

$12.00

TURNOLIVW1001
1.5" x 1.5" x 12"

Our Wild Olive turning blanks come in 2 sizes and are good quality lumber.

The photographs are representative of the stock you will receive.

SPRUCETHINS1001_2

$36.00$60.00

SPRUCEENGSB
" x " x "

Beautiful quarter-sawn Engelmann Spruce Sound Boards – 10 piece pack.

Gorgeous for musos and model makers…

Thickness: 3/8″

Length and Widths: Various available (select from dropdown)

Each pack consists of 10 pieces and Widths and Lengths mentioned are a minimum rather than an exact measure.

The photographs are representative of the stock you will receive.

SIDEROSEEI0303_1

$45.00

SIDEROSEEI0303
0.2" x 4.5" x 31.75"

Clear.

Lumber Packs
kiaat20bf

$320.00

PROJKIAAT1001
" x " x "

20 BF Kiaat project pack

Lengths: 60″-92″ (last piece might be shorter to balance BF total)
Widths: 4″ and wider
Thickness: Choose 4/4, 6/4 or 8/4 (nominal thickness)

We S2S by default – surfaced thickness will be up to 1/4″ less than nominal thickness.
You can choose to get the lumber in the rough by selecting Machining = none and get an additional $20 off.

Note:
Lead time is 3 working days.
Ships free via UPS/USPS.

MORADO1.5X1_1

$680.00

PROJMORA1001
" x " x "

20 BF Morado project pack

Lengths: 48″-92″ (last piece might be shorter to balance BF total)
Widths: 4″ and wider
Thickness: Choose 4/4 or 8/4 (nominal thickness)

We S2S by default – surfaced thickness will be up to 1/4″ less than nominal thickness.
You can choose to get the lumber in the rough by selecting Machining = none and get an additional $20 off.

Note:
Lead time is 3 working days.
Ships free via UPS/USPS.

cherrycurly20bf

$280.00

PROJCHERRCUR1001
1" x 4" x 48"

20 BF Curly Cherry project pack

Lengths: 48″-92″ (last piece might be shorter to balance bd.ft total)
Widths: 4″ and wider
Thickness: 4/4 nominal
Grade: 1 common + better

We S2S by default – surfaced thickness will be up to 1/4″ less than nominal thickness. (image is of S2S boards)
You can choose to get the lumber in the rough by selecting Machining = none and get an additional $20 off.

Note:
Lead time is 3 working days.
Ships free via UPS/USPS.

LEOPARD_20bf

$320.00

PROJLEOP1001
1" x 4" x 48"

20 BF Leopardwood project pack

Flecking: More scaly than lace’y (Unfortunately our stock is cut flat rather than QS, so flecking is not as pronounced as on QS stock – picture is indicative of our stock)
Lengths: 48″-92″ (last piece might be shorter to balance bd.ft total)
Widths: 4″ and wider
Thickness: 4/4 nominal

We S2S by default – surfaced thickness will be up to 1/4″ less than nominal thickness. (image is of S2S boards)
You can choose to get the lumber in the rough by selecting Machining = none and get an additional $20 off.
a
Note:
Lead time is 3 working days.
Ships free via UPS/USPS.

On Sale!
IVRED1015_1

$287.29

IVRED1015
1.3" x 6" x 62"

Max width 7″. Min 6″. Some checks through center of board

IVRED1008_1

$266.01

IVRED1008
1.3" x 8" x 59.5"

Max width 8.5″. Min width 3.75″. Crack on one face

IVRED1024_1

$283.75

IVRED1024
1.3" x 7" x 54.25"

Max width 9″. Min width 6.5″. Hairline cracks on sappy face. One large defect with hairline crack on good face

IVRED1028_1

$276.10

IVRED1028
1.3" x 7" x 56"

Max width 8″. Min width 6.25″. Large defect one end. Good face has 2 small knots. Defects on reverse face

WOOD OF THE WEEK

15% off - this week only

Wenge
Wenge Lumber @ Rare Woods USA

Wenge is unique among the world’s exotic woods. This tough tropical wood’s distinctive deep chocolate color — which can sometimes augmented by muted gold, orange, red or even burgundy tint — is actually known as “Wenge” in the color spectrum nomenclature of various parts of the world (with paint manufacturers, etc.). Its grains are generally straight (though sometimes wavy or irregular) and are accenuated by overlapping black lines which typically decorate the board’s surface.

While being considered a strong, durable wood, Wenge’s course, rugged texture makes it very splintery — making some craftsmen hesitant to use it. It can be difficult to work, although is glues well and is considered a very dimensionally stable species.

Exercise caution when working with this wood. Its splinters can be like little razors and when one pentetrates the skin, it is quite painful and the area can quickly and easily get infected, if quick action isn’t taken to remove it (the splinter) and sterilize the area.

Although most sources consider Wenge to be a dull wood with poor natural luster, our experience has revealed that a deep, glossy luster can sometimes emerge through fine-grit sanding of flatsawn boards. Its combination of relatively light weight, rot & insect resistance and impressive tensil strength has yielded the wood to a variety of indoor and outdoor uses, being particularly well suited for flooring in heavy traffic areas.

Wenge Lumber @ Rare Woods USA
Main Color GroupDark Brown
Grain Pattern Pronounced
Avg Dry Weight - LB/BF4.5
Avg Dry Weight - KG/M3870
Janka Hardness - LBF1930
Janka Hardness - N8600
0
    0
    Your Cart
    Your cart is emptyReturn to Shop