Shopping Cart

Page not found

BROWSE THOUSANDS OF LUMBER PRODUCTS

Individual Pieces
WALNAM1281_1

$36.12

WALNAM1281
1" x 6.88" x 40.06"

Crack. Small knot.

JATOB1057_1

$27.12

JATOB1057
1.88" x 3.94" x 34.63"

Checks.

LEOPARD1097_1

$61.54

LEOPARD1097
1" x 7.38" x 68.38"

Skip planed. Worm track.

MAPBEH1737_1

$48.79

MAPBEH1737
0.94" x 8.94" x 42.5"

Bark inclusion. High figure. Spalted. Beautiful board.

BOIRE1144_1

$34.21

BOIRE1144
1" x 4.75" x 48.25"

Edge defect,Skip planed,Wormholes

Pre-cut Sizes
FINGERCOCO1001_1

$20.00

FINGERCOCO1001
0.3" x 3" x 21"

Cocobolo Fingerboard

May contain some sapwood

21.0″ x 3.0″ x 0.30″ (minimum)

Manufactured with luthiers in mind, but excellent blanks for box-making and other smaller items

Photographs are representative of what you will receive

turnolivw-2

$12.00

TURNOLIVW1001
1.5" x 1.5" x 12"

Our Wild Olive turning blanks come in 2 sizes and are good quality lumber.

The photographs are representative of the stock you will receive.

turnebmac-1

$35.00$75.00

TURNEBMAC1001
" x " x "

Our Macassar Ebony turning squares come in range of sizes and are excellent quality lumber.

The sizes are all rough-guides, but are basically accurate.

If you have very strict size criteria, please just drop us an email to confirm they will meet your expectations.

The photographs are representative of the stock you will receive.  You won’t typically received surfaced blanks, but we surface a few on the photographs to give you an idea of what the lumber looks like.

LIGVITA1028_1

$56.45

LIGVITA1028
3" x 2.88" x 12"

Check throughout.

Lumber Packs
sassafras20bf

$180.00

PROJSASS1001
1" x 4" x 48"

20 BF Sassafras project pack

Lengths: 48″-92″ (last piece might be shorter to balance bd.ft total)
Widths: 4″ and wider
Thickness: 4/4 nominal
Grade: 1 common + better

We S2S by default – surfaced thickness will be up to 1/4″ less than nominal thickness. (image is of S2S boards)
You can choose to get the lumber in the rough by selecting Machining = none and get an additional $20 off.

Note:
Lead time is 3 working days.
Ships free via UPS/USPS.

birflr1.5X1_04

$244.00

PROJBIRCHFLR1001

20 BF Roasted Flame Birch project pack

Lengths: 60″-92″ (last piece might be shorter to balance BF total)
Widths: 4″ and wider
Thickness: Only 4/4 (nominal thickness) available

We S2S by default – surfaced thickness will be up to 1/4″ less than nominal thickness.
You can choose to get the lumber in the rough by selecting Machining = none and get an additional $20 off.

Note:
Lead time is 3 working days.
Ships free via UPS/USPS.

projmogaf1024

PROJMOGAFR1001

20 BF African Mahogany project pack

Lengths: 60″-92″ (last piece might be shorter to balance BF total)
Widths: 4″ and wider
Thickness: Choose 4/4, 6/4 or 8/4 nominal

We S2S by default – surfaced thickness will be up to 1/4″ less than nominal thickness.
You can choose to get the lumber in the rough by selecting Machining = none and get an additional $20 off.

Note:
Lead time is 3 working days.
Ships free via UPS/USPS.

KINGB1011_5

$1,554.39

KINGB1011
6" x 7" x 44"

Stunning Kingwood Boule – sold as one
All pieces are from the same log, so book-matched.
Sold individually pieces would cost over $1500.  Now on special for $1150

PIECELENWIDTHILBGRDNOTES
KINGB1101A4450.908.8AWane, sapwood
KINGB1101B4461.0012ANice
KINGB1101C4471.7521ABEnd split
KINGB1101D446.51.0012ASolid
KINGB1101E445.51.0010AWane, sapwood
On Sale!
IVRED1024_1

$283.75

IVRED1024
1.3" x 7" x 54.25"

Max width 9″. Min width 6.5″. Hairline cracks on sappy face. One large defect with hairline crack on good face

IVRED1028_1

$276.10

IVRED1028
1.3" x 7" x 56"

Max width 8″. Min width 6.25″. Large defect one end. Good face has 2 small knots. Defects on reverse face

IVRED1009_1

$219.70

IVRED1009
0.8" x 10.5" x 46"

Max width 13″. Cracks and defects both faces

IVRED1015_1

$287.29

IVRED1015
1.3" x 6" x 62"

Max width 7″. Min 6″. Some checks through center of board

WOOD OF THE WEEK

15% off - this week only

Wenge
Wenge Lumber @ Rare Woods USA

Wenge is unique among the world’s exotic woods. This tough tropical wood’s distinctive deep chocolate color — which can sometimes augmented by muted gold, orange, red or even burgundy tint — is actually known as “Wenge” in the color spectrum nomenclature of various parts of the world (with paint manufacturers, etc.). Its grains are generally straight (though sometimes wavy or irregular) and are accenuated by overlapping black lines which typically decorate the board’s surface.

While being considered a strong, durable wood, Wenge’s course, rugged texture makes it very splintery — making some craftsmen hesitant to use it. It can be difficult to work, although is glues well and is considered a very dimensionally stable species.

Exercise caution when working with this wood. Its splinters can be like little razors and when one pentetrates the skin, it is quite painful and the area can quickly and easily get infected, if quick action isn’t taken to remove it (the splinter) and sterilize the area.

Although most sources consider Wenge to be a dull wood with poor natural luster, our experience has revealed that a deep, glossy luster can sometimes emerge through fine-grit sanding of flatsawn boards. Its combination of relatively light weight, rot & insect resistance and impressive tensil strength has yielded the wood to a variety of indoor and outdoor uses, being particularly well suited for flooring in heavy traffic areas.

Wenge Lumber @ Rare Woods USA
Main Color GroupDark Brown
Grain Pattern Pronounced
Avg Dry Weight - LB/BF4.5
Avg Dry Weight - KG/M3870
Janka Hardness - LBF1930
Janka Hardness - N8600
0
    0
    Your Cart
    Your cart is emptyReturn to Shop