Shopping Cart

Page not found

BROWSE THOUSANDS OF LUMBER PRODUCTS

Individual Pieces
ROSEEI1044_1

$249.61

ROSEEI1044
2.06" x 5" x 67.06"

Knot

WENG1270_1

$61.43

WENG1270
1.06" x 5.75" x 49.31"

Skip planed

ASH1196_1

$35.70

ASH1196
1.06" x 9.25" x 40.56"

Skip planed

CHERR1516_1

$22.69

CHERR1516
0.94" x 5.25" x 40.25"

Nice board.

PADAUK1624_1

$26.93

PADAUK1624
0.94" x 6.06" x 30.38"

Skip planed.

Pre-cut Sizes
SIDEROSEEI1222_1

$45.00

SIDEROSEEI1222
0.24" x 4.75" x 33"

Bookmatched Guitar Sides set

FINGERROSEEI_1

$20.00

FINGERROSEEI1001
0.3" x 2.25" x 20"

East Indian Rosewood Fingerboard

20.0″ x 2.25-2.75″ (taper) x 0.30″ (within 0.3″ on length, width tapers)

Manufactured with luthiers in mind, but excellent blanks for box-making and other smaller items

Photographs are representative of what you will receive

If you have a strict dimensional requirement, please contact us to confirm we select the correct dimensions for you.

BACKROSEEI0964_1

$55.00

BACKROSEEI0964
0.2" x 8.88" x 23.5"

Clear.

LIGVITA1029_1

$30.72

LIGVITA1029
3" x 3.13" x 5.69"

Crack that runs throughout square.

Lumber Packs
KINGB190

$1,700.00

KINGB190
6" x 7" x 62"

Stunning Kingwood Boule – sold as one
All pieces are from the same log, so book-matched.
Sold individually pieces would cost almost $1900.  Now on special for $1700

PIECELENWIDTHILBGRDNOTES
KINGB190A            60.75           5.50              1.00              5.4ANice Board.
KINGB190B            60.5           6.50              1.06              6.5A6″ crack on end.
KINGB190C            61.0           7.00              2.25            10.6CRustic.
KINGB190D            60.5           6.00              1.00              6.2ASmall crack on end.

 

projchech1024

$380.00

PROJCHECH1001
1" x 4" x 48"

20 BF Chechen project pack

Lengths: 48″-92″ (last piece might be shorter to balance bd.ft total)
Widths: 4″ and wider
Thickness: 4/4 nominal

We S2S by default – surfaced thickness will be up to 1/4″ less than nominal thickness.
You can choose to get the lumber in the rough by selecting Machining = none and get an additional $20 off.

Note:
Lead time is 3 working days.
Ships free via UPS/USPS.

projpadauk1024

$310.00$350.00

PROJPADAUK1001
" x " x "

20 BF Padauk project pack

Lengths: 48″-92″ (last piece might be shorter to balance BF total)
Widths: 4″ and wider
Thickness: Choose 4/4, 6/4 or 8/4 nominal

We S2S by default – surfaced thickness will be up to 1/4″ less than nominal thickness.
You can choose to get the lumber in the rough by selecting Machining = none and get an additional $20 off.

Note:
Lead time is 3 working days.
Ships free via UPS/USPS.

bubinga-7v2

$460.00$480.00

PROJBUB1001
" x " x "

20 BF Bubinga project pack

Lengths: 60″-92″ (last piece might be shorter to balance BF total)
Widths: 4″ and wider
Thickness: Choose 4/4, 5/4, 6/4 or 8/4 nominal

We S2S by default – surfaced thickness will be up to 1/4″ less than nominal thickness.
You can choose to get the lumber in the rough by selecting Machining = none and get an additional $20 off.

Note:
Lead time is 3 working days.
Ships free via UPS/USPS.

On Sale!
IVRED1029_1

$332.43

IVRED1029
1.3" x 7.5" x 56.25"

Max width 8″. Min width 7″. Hairline cracks on one face. Good face has minor end checks one end.

IVRED1030_1

$202.38

IVRED1030
1.3" x 6" x 37.5"

Max width 8″. Min width 6.5″. Defects one end. Checking at other end.

IVRED1014_1

$246.89

IVRED1014
1.3" x 7" x 53.25"

Min width 5.5″. Max width 7.5″. Heart checks. Small tight knots

IVRED1008_1

$266.01

IVRED1008
1.3" x 8" x 59.5"

Max width 8.5″. Min width 3.75″. Crack on one face

WOOD OF THE WEEK

15% off - this week only

Wenge
Wenge Lumber @ Rare Woods USA

Wenge is unique among the world’s exotic woods. This tough tropical wood’s distinctive deep chocolate color — which can sometimes augmented by muted gold, orange, red or even burgundy tint — is actually known as “Wenge” in the color spectrum nomenclature of various parts of the world (with paint manufacturers, etc.). Its grains are generally straight (though sometimes wavy or irregular) and are accenuated by overlapping black lines which typically decorate the board’s surface.

While being considered a strong, durable wood, Wenge’s course, rugged texture makes it very splintery — making some craftsmen hesitant to use it. It can be difficult to work, although is glues well and is considered a very dimensionally stable species.

Exercise caution when working with this wood. Its splinters can be like little razors and when one pentetrates the skin, it is quite painful and the area can quickly and easily get infected, if quick action isn’t taken to remove it (the splinter) and sterilize the area.

Although most sources consider Wenge to be a dull wood with poor natural luster, our experience has revealed that a deep, glossy luster can sometimes emerge through fine-grit sanding of flatsawn boards. Its combination of relatively light weight, rot & insect resistance and impressive tensil strength has yielded the wood to a variety of indoor and outdoor uses, being particularly well suited for flooring in heavy traffic areas.

Wenge Lumber @ Rare Woods USA
Main Color GroupDark Brown
Grain Pattern Pronounced
Avg Dry Weight - LB/BF4.5
Avg Dry Weight - KG/M3870
Janka Hardness - LBF1930
Janka Hardness - N8600
0
    0
    Your Cart
    Your cart is emptyReturn to Shop