Shopping Cart

Page not found

BROWSE THOUSANDS OF LUMBER PRODUCTS

Individual Pieces
CANAR1148_1

$22.56

CANAR1148
0.88" x 4.38" x 32.69"

Checks. Great color.

MAPBEHR1122_1

$35.60

MAPBEHR1122
0.81" x 8.44" x 42.69"

Cracks. Skip planed.

MAPCH1087_1

$32.60

MAPCH1087
1" x 6.13" x 54.94"

Edge defect. Bark inclusion.

AFROR1126_1

$30.24

AFROR1126
0.88" x 4.44" x 41.88"

Bark inclusions. Worm tracks. Defects in edge.

BIRFLR1192_1

$20.48

BIRFLR1192
0.88" x 5.25" x 42.75"

Defect on edge.

Pre-cut Sizes
tamspalt-1

BOWLTAMSPALT1001

Our Spalted Tamarind bowl blanks come in two sizes and are excellent quality lumber. 

The end-grain as been sealed.  The sizes are all rough-guides, but are basically accurate.  If you have very strict size criteria, please just drop us an email to confirm they will meet your expectations.

The photographs are representative of the stock you will receive.  You won’t typically received surfaced blanks, but we surface a few on the photographs to give you an idea of what the lumber looks like.

blafbagpipes-2

$450.00

BAGPBLAF1001
10" x 10" x 15"

African Blackwood Bagpipe Set – Instrument Grade.

14 Pieces (metric mm / +- imperial inches):

1 of 54 x 54 x 305 /  2 x 2 x 12

2 of 51 x 51 x 205 / 2 x 2 x 8

1 of 38 x 38 x 385 / 1.5 x 1.5 x 15

1 of 47 x 47 x 310 / 2 x 2 x 12

1 of 47 x 47 x 195 / 2 x 2 x 8

2 of 47 x 47 x 160 / 2 x 2 x 6

1 of 47 x 47 x 125 / 2 x 2 x 5

1 of 47 x 47 x 115 / 2 x 2 x 4.5

1 of 38 x 38 x 310 / 1.5 x 1.5 x 12

1 of 38 x 38 x 245 / 1.5 x 1.5 x 10

2 of 38 x 38 x 220 / 1.5 x 1.5 x 9

LIGVITA1009_1

$48.38

LIGVITA1009
2.88" x 3" x 10.25"

Crack.

LIGVITA1027_1

$50.69

LIGVITA1027
3" x 2.88" x 11.75"

Defects throughout.

Lumber Packs
GONCA_20bf

$280.00$290.00

PROJGONC1001
" x " x "

20 BF Goncalo Alves project pack

Striping: Variable – Typically Light to Medium
Lengths: 60″-92″ (last piece might be shorter to balance BF total)
Widths: 4″ and wider
Thickness: Choose 4/4 or 8/4 no minal

We S2S by default – surfaced thickness will be up to 1/4″ less than nominal thickness.
You can choose to get the lumber in the rough by selecting Machining = none and get $20 off.

Note:
Lead time is 3 working days.
Ships free via UPS/USPS.

projelm1024

$214.00

PROJELM1001
1" x 4" x 48"

20 BF Elm – 1 Common project pack

Lengths: 48″-92″ (last piece might be shorter to balance bd.ft total)
Widths: 4″ and wider
Thickness: 4/4 nominal

We S2S by default – surfaced thickness will be up to 1/4″ less than nominal thickness.
You can choose to get the lumber in the rough by selecting Machining = none and get an additional $20 off.

Note:
Lead time is 3 working days.
Ships free via UPS/USPS.

sassafras20bf

$180.00

PROJSASS1001
1" x 4" x 48"

20 BF Sassafras project pack

Lengths: 48″-92″ (last piece might be shorter to balance bd.ft total)
Widths: 4″ and wider
Thickness: 4/4 nominal
Grade: 1 common + better

We S2S by default – surfaced thickness will be up to 1/4″ less than nominal thickness. (image is of S2S boards)
You can choose to get the lumber in the rough by selecting Machining = none and get an additional $20 off.

Note:
Lead time is 3 working days.
Ships free via UPS/USPS.

projmogbraz1024

$271.00$290.00

PROJMOGBRAZ1001
" x " x "

20 BF Genuine Mahogany project pack

Lengths: 60″-92″ (last piece might be shorter to balance BF total)
Widths: 4″ and wider
Thickness: Choose 4/4, 6/4 or 8/4 nominal

We S2S by default – surfaced thickness will be up to 1/4″ less than nominal thickness.
You can choose to get the lumber in the rough by selecting Machining = none and get an additional $20 off.

Note:
Lead time is 3 working days.
Ships free via UPS/USPS.

On Sale!
IVRED1031_1

$596.95

IVRED1031
2.75" x 8" x 54.75"

Surface checks in sapwood. End checks and pith one side.

IVRED1032_1

$359.00

IVRED1032
1.25" x 9.5" x 45.5"

Open pith and defects both sides.

IVRED1028_1

$276.10

IVRED1028
1.3" x 7" x 56"

Max width 8″. Min width 6.25″. Large defect one end. Good face has 2 small knots. Defects on reverse face

KINGB186_2

$1,750.00

KINGB186
6" x 7" x 56"

Stunning Kingwood Boule – sold as one
All pieces are from the same log, so book-matched.
Sold individually pieces would cost over $2000.  Now on special for $1750

PIECELENWIDTHILBGRDNOTES
KINGB186A            56.0              6.5              1.0              5.4ASolid, no checks.
KINGB186B            56.0              7.3              0.9              6.5AWidest point 8”.
KINGB186C            56.0              7.8              1.4            10.6ABCracks on ends.
KINGB186D            56.0              7.3              1.0              6.2AWidest point 8”. Check one end.
KINGB186E            56.0              5.8              1.0            12.2AClear two face.

WOOD OF THE WEEK

15% off - this week only

Wenge
Wenge Lumber @ Rare Woods USA

Wenge is unique among the world’s exotic woods. This tough tropical wood’s distinctive deep chocolate color — which can sometimes augmented by muted gold, orange, red or even burgundy tint — is actually known as “Wenge” in the color spectrum nomenclature of various parts of the world (with paint manufacturers, etc.). Its grains are generally straight (though sometimes wavy or irregular) and are accenuated by overlapping black lines which typically decorate the board’s surface.

While being considered a strong, durable wood, Wenge’s course, rugged texture makes it very splintery — making some craftsmen hesitant to use it. It can be difficult to work, although is glues well and is considered a very dimensionally stable species.

Exercise caution when working with this wood. Its splinters can be like little razors and when one pentetrates the skin, it is quite painful and the area can quickly and easily get infected, if quick action isn’t taken to remove it (the splinter) and sterilize the area.

Although most sources consider Wenge to be a dull wood with poor natural luster, our experience has revealed that a deep, glossy luster can sometimes emerge through fine-grit sanding of flatsawn boards. Its combination of relatively light weight, rot & insect resistance and impressive tensil strength has yielded the wood to a variety of indoor and outdoor uses, being particularly well suited for flooring in heavy traffic areas.

Wenge Lumber @ Rare Woods USA
Main Color GroupDark Brown
Grain Pattern Pronounced
Avg Dry Weight - LB/BF4.5
Avg Dry Weight - KG/M3870
Janka Hardness - LBF1930
Janka Hardness - N8600
0
    0
    Your Cart
    Your cart is emptyReturn to Shop