Shopping Cart

Page not found

BROWSE THOUSANDS OF LUMBER PRODUCTS

Individual Pieces
KIAAT1262_1

$29.96

KIAAT1262
0.94" x 6.19" x 41.5"

Minor crack. Minor bark inclusion.

WALNAF1139_1

$17.42

WALNAF1139
1" x 4.81" x 40"

Nice board.

ROSEAF1194_1

$27.63

ROSEAF1194
1" x 5.94" x 40.5"

Edge defect

CHERR1301_1

$69.22

CHERR1301
1.94" x 6.63" x 48.69"

Skip planed,Edge defect,Bark inclusion,Crack

MAPBEH1599_1

$31.62

MAPBEH1599
0.88" x 6.63" x 40.88"

Sparse figure.

Pre-cut Sizes
IVREDSQB1006_1

$70.00

IVREDSQB1006
2" x 2" x 12"

4-piece pack: B Grade Pink Ivory Turning Squares.Rough Dimensions: 2.0×2.0x12″50% cheaper than our A grade price.Pieces might have wane, sap, cracks present and/or be of lower color quality.We photograph all 4 sides of each piece/pack. What you see is what you get.

turnpack03-2

$75.00

TURNPACK003
2" x 12" x 12"

East Indian Rosewood turning blanks

  • 5 x East Indian Rosewood: 12 x 2 x 2
  • 2 x East Indian Rosewood: 12 x 1 x 1

Any woodturners delight…!

Please note: we surfaced one edge on the samples to show how they will look. You won’t necessarily received surfaced blanks.

BUBGB0363_1

$35.00

BUBGB0363
0.2" x 8.88" x 22"

Clear.

BUBGB0477_1

$35.00

BUBGB0477
0.2" x 8.75" x 21.75"

Clear.

Lumber Packs
projchech1024

$380.00

PROJCHECH1001
1" x 4" x 48"

20 BF Chechen project pack

Lengths: 48″-92″ (last piece might be shorter to balance bd.ft total)
Widths: 4″ and wider
Thickness: 4/4 nominal

We S2S by default – surfaced thickness will be up to 1/4″ less than nominal thickness.
You can choose to get the lumber in the rough by selecting Machining = none and get an additional $20 off.

Note:
Lead time is 3 working days.
Ships free via UPS/USPS.

projmapbew1fhf1024

$380.00

PROJMAPBEHHFW1F1001
1" x 4" x 48"

20 BF Medium-Heavy Figure Birdseye Maple W1F project pack

Figure: Medium-Heavy
Color: White 1 Face or Better
Lengths: 60″-92″ (last piece might be shorter to balance bd.ft total)
Widths: 4″ and wider
Thickness: 4/4 nominal

We S2S by default – surfaced thickness will be up to 1/4″ less than nominal thickness.
You can choose to get the lumber in the rough by selecting Machining = none and get an additional $20 off.

Note:
Lead time on rough lumber is 2 working days.
Lead time on S2S is 3 working days.
Ships free via UPS/USPS.

GONCA_20bf

$280.00$290.00

PROJGONC1001
" x " x "

20 BF Goncalo Alves project pack

Striping: Variable – Typically Light to Medium
Lengths: 60″-92″ (last piece might be shorter to balance BF total)
Widths: 4″ and wider
Thickness: Choose 4/4 or 8/4 no minal

We S2S by default – surfaced thickness will be up to 1/4″ less than nominal thickness.
You can choose to get the lumber in the rough by selecting Machining = none and get $20 off.

Note:
Lead time is 3 working days.
Ships free via UPS/USPS.

projcanary1024

$380.00

PROJCANAR1001
" x " x "

20 BF Canarywood project pack

Lengths: 48″-92″ (last piece might be shorter to balance BF total)
Widths: 3″ and wider
Thickness: Choose 4/4 or 8/4 nominal

We S2S by default – surfaced thickness will be up to 1/4″ less than nominal thickness.
You can choose to get the lumber in the rough by selecting Machining = none and get an additional $20 off.

Note:
Lead time is 3 working days.
Ships free via UPS/USPS.

On Sale!
IVRED1031_1

$596.95

IVRED1031
2.75" x 8" x 54.75"

Surface checks in sapwood. End checks and pith one side.

IVRED1015_1

$287.29

IVRED1015
1.3" x 6" x 62"

Max width 7″. Min 6″. Some checks through center of board

IVRED1032_1

$359.00

IVRED1032
1.25" x 9.5" x 45.5"

Open pith and defects both sides.

IVRED1024_1

$283.75

IVRED1024
1.3" x 7" x 54.25"

Max width 9″. Min width 6.5″. Hairline cracks on sappy face. One large defect with hairline crack on good face

WOOD OF THE WEEK

15% off - this week only

Wenge
Wenge Lumber @ Rare Woods USA

Wenge is unique among the world’s exotic woods. This tough tropical wood’s distinctive deep chocolate color — which can sometimes augmented by muted gold, orange, red or even burgundy tint — is actually known as “Wenge” in the color spectrum nomenclature of various parts of the world (with paint manufacturers, etc.). Its grains are generally straight (though sometimes wavy or irregular) and are accenuated by overlapping black lines which typically decorate the board’s surface.

While being considered a strong, durable wood, Wenge’s course, rugged texture makes it very splintery — making some craftsmen hesitant to use it. It can be difficult to work, although is glues well and is considered a very dimensionally stable species.

Exercise caution when working with this wood. Its splinters can be like little razors and when one pentetrates the skin, it is quite painful and the area can quickly and easily get infected, if quick action isn’t taken to remove it (the splinter) and sterilize the area.

Although most sources consider Wenge to be a dull wood with poor natural luster, our experience has revealed that a deep, glossy luster can sometimes emerge through fine-grit sanding of flatsawn boards. Its combination of relatively light weight, rot & insect resistance and impressive tensil strength has yielded the wood to a variety of indoor and outdoor uses, being particularly well suited for flooring in heavy traffic areas.

Wenge Lumber @ Rare Woods USA
Main Color GroupDark Brown
Grain Pattern Pronounced
Avg Dry Weight - LB/BF4.5
Avg Dry Weight - KG/M3870
Janka Hardness - LBF1930
Janka Hardness - N8600
0
    0
    Your Cart
    Your cart is emptyReturn to Shop