Shopping Cart

Page not found

BROWSE THOUSANDS OF LUMBER PRODUCTS

Individual Pieces
ROSEHOND1103_1

$78.50

ROSEHOND1103
0.88" x 6.25" x 40.06"

Cracks.

REDHT1318_1

$44.20

REDHT1318
0.94" x 6.25" x 36.94"

Worm tracks.

NOG1057_1

$77.06

NOG1057
0.94" x 8" x 63.69"

Skip planed. Minor defect on edge.

CHECH1399_1

$31.30

CHECH1399
0.88" x 4.31" x 38.31"

Nice board.

ROSEAF1152_1

$37.77

ROSEAF1152
0.88" x 7.38" x 40.25"

Wormhole

Pre-cut Sizes
bowlash-2

BOWLASH1001

Ash Bowl Blank

Excellent quality lumber

End-grain has been sealed

Size can vary by 1/8 of an inch.  Please reach out if you have very strict size criteria.

Note: photo is representative of the stock you will receive.

BUBGB0566_1

$35.00

BUBGB0566
0.2" x 8.88" x 21.75"

Clear.

IVREDSQB1011_1

$70.00

IVREDSQB1011
2" x 2" x 12"

4-piece pack: B Grade Pink Ivory Turning Squares.Rough Dimensions: 2.0×2.0x12″50% cheaper than our A grade price.Pieces might have wane, sap, cracks present and/or be of lower color quality.We photograph all 4 sides of each piece/pack. What you see is what you get.

turnpack03-2

$75.00

TURNPACK003
2" x 12" x 12"

East Indian Rosewood turning blanks

  • 5 x East Indian Rosewood: 12 x 2 x 2
  • 2 x East Indian Rosewood: 12 x 1 x 1

Any woodturners delight…!

Please note: we surfaced one edge on the samples to show how they will look. You won’t necessarily received surfaced blanks.

Lumber Packs
MORADO1.5X1_1

$680.00

PROJMORA1001
" x " x "

20 BF Morado project pack

Lengths: 48″-92″ (last piece might be shorter to balance BF total)
Widths: 4″ and wider
Thickness: Choose 4/4 or 8/4 (nominal thickness)

We S2S by default – surfaced thickness will be up to 1/4″ less than nominal thickness.
You can choose to get the lumber in the rough by selecting Machining = none and get an additional $20 off.

Note:
Lead time is 3 working days.
Ships free via UPS/USPS.

KINGB1011_5

$1,554.39

KINGB1011
6" x 7" x 44"

Stunning Kingwood Boule – sold as one
All pieces are from the same log, so book-matched.
Sold individually pieces would cost over $1500.  Now on special for $1150

PIECELENWIDTHILBGRDNOTES
KINGB1101A4450.908.8AWane, sapwood
KINGB1101B4461.0012ANice
KINGB1101C4471.7521ABEnd split
KINGB1101D446.51.0012ASolid
KINGB1101E445.51.0010AWane, sapwood
projmapcs1024

$243.00$315.00

PROJMAPCS1001
" x " x "

20 BF Curly Soft Maple project pack

Color: White 1 Face
Lengths: 48″-92″ (last piece might be shorter to balance BF total)
Widths: 4″ and wider
Figure: Light to Medium
Thickness: Choose 4/4, 6/4 or 8/4 nominal

We S2S by default – surfaced thickness will be up to 1/4″ less than nominal thickness.
You can choose to get the lumber in the rough by selecting Machining = none and get an additional $20 off.

Note:
Lead time is 3 working days.
Ships free via UPS/USPS.

projmogaf1024

PROJMOGAFR1001

20 BF African Mahogany project pack

Lengths: 60″-92″ (last piece might be shorter to balance BF total)
Widths: 4″ and wider
Thickness: Choose 4/4, 6/4 or 8/4 nominal

We S2S by default – surfaced thickness will be up to 1/4″ less than nominal thickness.
You can choose to get the lumber in the rough by selecting Machining = none and get an additional $20 off.

Note:
Lead time is 3 working days.
Ships free via UPS/USPS.

On Sale!
IVRED1014_1

$246.89

IVRED1014
1.3" x 7" x 53.25"

Min width 5.5″. Max width 7.5″. Heart checks. Small tight knots

IVRED1024_1

$283.75

IVRED1024
1.3" x 7" x 54.25"

Max width 9″. Min width 6.5″. Hairline cracks on sappy face. One large defect with hairline crack on good face

IVRED1022_1

$168.37

IVRED1022
1.55" x 5" x 33.75"

Max width 7.5″. Min width 4″. End checks. Mostly sap on reverse face

IVRED1030_1

$202.38

IVRED1030
1.3" x 6" x 37.5"

Max width 8″. Min width 6.5″. Defects one end. Checking at other end.

WOOD OF THE WEEK

15% off - this week only

Wenge
Wenge Lumber @ Rare Woods USA

Wenge is unique among the world’s exotic woods. This tough tropical wood’s distinctive deep chocolate color — which can sometimes augmented by muted gold, orange, red or even burgundy tint — is actually known as “Wenge” in the color spectrum nomenclature of various parts of the world (with paint manufacturers, etc.). Its grains are generally straight (though sometimes wavy or irregular) and are accenuated by overlapping black lines which typically decorate the board’s surface.

While being considered a strong, durable wood, Wenge’s course, rugged texture makes it very splintery — making some craftsmen hesitant to use it. It can be difficult to work, although is glues well and is considered a very dimensionally stable species.

Exercise caution when working with this wood. Its splinters can be like little razors and when one pentetrates the skin, it is quite painful and the area can quickly and easily get infected, if quick action isn’t taken to remove it (the splinter) and sterilize the area.

Although most sources consider Wenge to be a dull wood with poor natural luster, our experience has revealed that a deep, glossy luster can sometimes emerge through fine-grit sanding of flatsawn boards. Its combination of relatively light weight, rot & insect resistance and impressive tensil strength has yielded the wood to a variety of indoor and outdoor uses, being particularly well suited for flooring in heavy traffic areas.

Wenge Lumber @ Rare Woods USA
Main Color GroupDark Brown
Grain Pattern Pronounced
Avg Dry Weight - LB/BF4.5
Avg Dry Weight - KG/M3870
Janka Hardness - LBF1930
Janka Hardness - N8600
0
    0
    Your Cart
    Your cart is emptyReturn to Shop