Shopping Cart

Page not found

BROWSE THOUSANDS OF LUMBER PRODUCTS

Individual Pieces
CHERR1262_1

$31.69

CHERR1262
0.94" x 5.94" x 47.81"

Skip planed. Pitch pockets.

ASH1102_1

$22.20

ASH1102
1" x 8.31" x 42.75"

Knot. Defect on surface.

GRAN1180_1

$52.30

GRAN1180
.94" x 5.06" x 47.06"

Skip planed. Nice color and figure.

PADAUK1511_1

$57.12

PADAUK1511
0.94" x 6.06" x 61.25"

Pinholes.

OSOR1139_1

$37.30

OSOR1139
1" x 6" x 37.81"

Skip planed,Crack,Worm tracks,Bark inclusion

Pre-cut Sizes
IVREDSQB1013_1

$70.00

IVREDSQB1013
2" x 2" x 12"

4-piece pack: B Grade Pink Ivory Turning Squares.

Rough Dimensions: 2.0×2.0x12″50% cheaper than our A grade price.

Pieces might have wane, sap, cracks present and/or be of lower color quality.

We photograph all 4 sides of each piece/pack.

What you see is what you get.

LIGVITA1013_1

$18.43

LIGVITA1013
3" x 3.38" x 3.63"

Checks.

BLAFSQB2002_1

$75.00

BLAFSQB2002
1.5" x 1.5" x 12"

6-piece pack: B Grade African Blackwood Turning Squares.Rough Dimensions: 1.5×1.5×12″ – can occasionally be a bit undersized. 50% cheaper than our A grade price.Pieces might have wane, sap, rot, cracks present and/or be of lower color quality, but are still very usable.We photograph all 4 sides of each piece/pack. What you see is what you get.

BACKROSEEI0277_1

$55.00

BACKROSEEI0277
0.2" x 8" x 21.56"

Clear.

Lumber Packs
projchech1024

$380.00

PROJCHECH1001
1" x 4" x 48"

20 BF Chechen project pack

Lengths: 48″-92″ (last piece might be shorter to balance bd.ft total)
Widths: 4″ and wider
Thickness: 4/4 nominal

We S2S by default – surfaced thickness will be up to 1/4″ less than nominal thickness.
You can choose to get the lumber in the rough by selecting Machining = none and get an additional $20 off.

Note:
Lead time is 3 working days.
Ships free via UPS/USPS.

projmapbew1flf

$247.00

PROJMAPBEHLFW1F1001
1" x 4" x 48"

20 BF Low-Medium Figure Birdseye Maple W1F project pack

Figure: Low-Medium
Color: White 1 Face and Better
Lengths: 60″-92″ (last piece might be shorter to balance bd.ft total)
Widths: 4″ and wider
Thickness: 4/4 nominal

We S2S by default – surfaced thickness will be up to 1/4″ less than nominal thickness.
You can choose to get the lumber in the rough by selecting Machining = none and get an additional $20 off.

Note:
Lead time on rough lumber is 2 working days.
Lead time on S2S is 3 working days.
Ships free via UPS/USPS.

projebamara1024

$850.00

PROJEBAMARA1001
1" x 4" x 48"

20 BF Amara Ebony project pack

Lengths: 48″-92″ (last piece might be shorter to balance bd.ft total)
Widths: 3″ and wider
Thickness: 4/4 nominal

We S2S by default – surfaced thickness will be up to 1/4″ less than nominal thickness.
You can choose to get the lumber in the rough by selecting Machining = none and get an additional $20 off.

Note:
Lead time is 3 working days.
Ships free via UPS/USPS.

bubinga-7v2

$460.00$480.00

PROJBUB1001
" x " x "

20 BF Bubinga project pack

Lengths: 60″-92″ (last piece might be shorter to balance BF total)
Widths: 4″ and wider
Thickness: Choose 4/4, 5/4, 6/4 or 8/4 nominal

We S2S by default – surfaced thickness will be up to 1/4″ less than nominal thickness.
You can choose to get the lumber in the rough by selecting Machining = none and get an additional $20 off.

Note:
Lead time is 3 working days.
Ships free via UPS/USPS.

On Sale!
IVRED1029_1

$332.43

IVRED1029
1.3" x 7.5" x 56.25"

Max width 8″. Min width 7″. Hairline cracks on one face. Good face has minor end checks one end.

IVRED1009_1

$219.70

IVRED1009
0.8" x 10.5" x 46"

Max width 13″. Cracks and defects both faces

IVRED1014_1

$246.89

IVRED1014
1.3" x 7" x 53.25"

Min width 5.5″. Max width 7.5″. Heart checks. Small tight knots

IVRED1021_1

$182.21

IVRED1021
1.3" x 5" x 50.5"

Max width 5.5″. Min width 3.25″. Sap cracks.

WOOD OF THE WEEK

15% off - this week only

Wenge
Wenge Lumber @ Rare Woods USA

Wenge is unique among the world’s exotic woods. This tough tropical wood’s distinctive deep chocolate color — which can sometimes augmented by muted gold, orange, red or even burgundy tint — is actually known as “Wenge” in the color spectrum nomenclature of various parts of the world (with paint manufacturers, etc.). Its grains are generally straight (though sometimes wavy or irregular) and are accenuated by overlapping black lines which typically decorate the board’s surface.

While being considered a strong, durable wood, Wenge’s course, rugged texture makes it very splintery — making some craftsmen hesitant to use it. It can be difficult to work, although is glues well and is considered a very dimensionally stable species.

Exercise caution when working with this wood. Its splinters can be like little razors and when one pentetrates the skin, it is quite painful and the area can quickly and easily get infected, if quick action isn’t taken to remove it (the splinter) and sterilize the area.

Although most sources consider Wenge to be a dull wood with poor natural luster, our experience has revealed that a deep, glossy luster can sometimes emerge through fine-grit sanding of flatsawn boards. Its combination of relatively light weight, rot & insect resistance and impressive tensil strength has yielded the wood to a variety of indoor and outdoor uses, being particularly well suited for flooring in heavy traffic areas.

Wenge Lumber @ Rare Woods USA
Main Color GroupDark Brown
Grain Pattern Pronounced
Avg Dry Weight - LB/BF4.5
Avg Dry Weight - KG/M3870
Janka Hardness - LBF1930
Janka Hardness - N8600
0
    0
    Your Cart
    Your cart is emptyReturn to Shop