Page not found
BROWSE THOUSANDS OF LUMBER PRODUCTS
Individual Pieces
$43.76
Beautiful figure. Knot. Knot defect.
$18.00
Worm tracks. Pitch pockets. Defect on edge.
$20.09
Bark inclusions,Edge defects,Knots,Surface defect
Pre-cut Sizes
$20.00
Rosewood Tucurensis Fingerboard
21″ x 3″ (taper) x 0.30″ (minimum)
Manufactured with luthiers in mind, but excellent blanks for box-making and other smaller items
Photographs are representative of what you will receive
If you have a strict dimensional requirement, please contact us to confirm we select the correct dimensions for you.
Lumber Packs
$200.00
20 BF Butternut project pack
Lengths: 48″-92″ (last piece might be shorter to balance bd.ft total)
Widths: 4″ and wider
Thickness: 4/4 nominal
Grade: 1 common
We S2S by default – surfaced thickness will be up to 1/4″ less than nominal thickness. (image is of S2S boards)
You can choose to get the lumber in the rough by selecting Machining = none and get an additional $20 off.
Note:
Lead time is 3 working days.
Ships free via UPS/USPS.
$190.00
20 BF Red Oak project pack
Lengths: 48″-92″ (last piece might be shorter to balance bd.ft total)
Widths: 4″ and wider
Thickness: 4/4 nominal
Grade: Select + better
We S2S by default – surfaced thickness will be up to 1/4″ less than nominal thickness.
You can choose to get the lumber in the rough by selecting Machining = none and get an additional $20 off.
Note:
Lead time is 3 working days.
Ships free via UPS/USPS.
$460.00 – $480.00
20 BF Bubinga project pack
Lengths: 60″-92″ (last piece might be shorter to balance BF total)
Widths: 4″ and wider
Thickness: Choose 4/4, 5/4, 6/4 or 8/4 nominal
We S2S by default – surfaced thickness will be up to 1/4″ less than nominal thickness.
You can choose to get the lumber in the rough by selecting Machining = none and get an additional $20 off.
Note:
Lead time is 3 working days.
Ships free via UPS/USPS.
$180.00
20 BF Sassafras project pack
Lengths: 48″-92″ (last piece might be shorter to balance bd.ft total)
Widths: 4″ and wider
Thickness: 4/4 nominal
Grade: 1 common + better
We S2S by default – surfaced thickness will be up to 1/4″ less than nominal thickness. (image is of S2S boards)
You can choose to get the lumber in the rough by selecting Machining = none and get an additional $20 off.
Note:
Lead time is 3 working days.
Ships free via UPS/USPS.
On Sale!
$313.85 $219.70
Max width 13″. Cracks and defects both faces
$352.70 $246.89
Min width 5.5″. Max width 7.5″. Heart checks. Small tight knots
$380.02 $266.01
Max width 8.5″. Min width 3.75″. Crack on one face
WOOD OF THE WEEK
15% off - this week only
Wenge is unique among the world’s exotic woods. This tough tropical wood’s distinctive deep chocolate color — which can sometimes augmented by muted gold, orange, red or even burgundy tint — is actually known as “Wenge” in the color spectrum nomenclature of various parts of the world (with paint manufacturers, etc.). Its grains are generally straight (though sometimes wavy or irregular) and are accenuated by overlapping black lines which typically decorate the board’s surface.
While being considered a strong, durable wood, Wenge’s course, rugged texture makes it very splintery — making some craftsmen hesitant to use it. It can be difficult to work, although is glues well and is considered a very dimensionally stable species.
Exercise caution when working with this wood. Its splinters can be like little razors and when one pentetrates the skin, it is quite painful and the area can quickly and easily get infected, if quick action isn’t taken to remove it (the splinter) and sterilize the area.
Although most sources consider Wenge to be a dull wood with poor natural luster, our experience has revealed that a deep, glossy luster can sometimes emerge through fine-grit sanding of flatsawn boards. Its combination of relatively light weight, rot & insect resistance and impressive tensil strength has yielded the wood to a variety of indoor and outdoor uses, being particularly well suited for flooring in heavy traffic areas.
Main Color Group | Dark Brown |
Grain Pattern | Pronounced |
Avg Dry Weight - LB/BF | 4.5 |
Avg Dry Weight - KG/M3 | 870 |
Janka Hardness - LBF | 1930 |
Janka Hardness - N | 8600 |