Shopping Cart

Page not found

BROWSE THOUSANDS OF LUMBER PRODUCTS

Individual Pieces
AFROR1083_1

$100.36

AFROR1083
0.94" x 11.5" x 46.5"

Skip planed

BEECHES1078_1

$27.56

BEECHES1078
0.81" x 4.94" x 48.94"

Small cracks

TAMSP1006_1

$53.30

TAMSP1006
1" x 4.81" x 42.31"

Skip planed,Edge defect

AVO1146_1

$32.40

AVO1146
1.06" x 9.5" x 42"

Small edge defects

SATINEI1096_1

$35.85

SATINEI1096
1.13" x 4" x 30.13"

Surface defect

Pre-cut Sizes
FINGERCOCO1001_1

$20.00

FINGERCOCO1001
0.3" x 3" x 21"

Cocobolo Fingerboard

May contain some sapwood

21.0″ x 3.0″ x 0.30″ (minimum)

Manufactured with luthiers in mind, but excellent blanks for box-making and other smaller items

Photographs are representative of what you will receive

turnpurp-1

$5.00

PURP_1.5X1.5X21_EA
1.5" x 1.5" x 21"

Our Purpleheart turning squares are excellent quality lumber.

The sizes are all rough-guides, but are basically accurate.

If you have very strict size criteria, please just drop us an email to confirm they will meet your expectations.

You get discounts at 5, 10 and 20 pieces.

The photographs are representative of the stock you will receive.  You won’t typically received surfaced blanks, but we surface a few on the photographs to give you an idea of what the lumber looks like.

FINGERZEB1001_1

$20.00

FINGERZEB1001
0.3" x 3" x 21"

Quartersawn Zebrawood Fingerboard

21.0″ x 3.0″ x 0.30″ (minimum)

Manufactured with luthiers in mind, but excellent blanks for box-making and other smaller items

Photographs are representative of what you will receive

TURNMOGPOD1001

TURNMOGPOD1001

Our Pod Mahogany turning blanks come in two sizes and are excellent quality lumber.

The end-grain as been sealed.  The sizes are all rough-guides, but are basically accurate.  If you have very strict size criteria, please just drop us an email to confirm they will meet your expectations.

The photographs are representative of the stock you will receive.  You won’t typically received surfaced blanks, but we surface a few on the photographs to give you an idea of what the lumber looks like.

Lumber Packs
projwalnaf1024

$242.00$261.00

PROJWALNAFR1001
" x " x "

20 BF African Walnut project pack

Lengths: 48″-92″ (last piece might be shorter to balance BF total)
Widths: 4″ and wider
Thickness: Choose 4/4, 6/4 or 8/4 nominal

We S2S by default – surfaced thickness will be up to 1/4″ less than nominal thickness.
You can choose to get the lumber in the rough by selecting Machining = none and get an additional $20 off.

Note:
Lead time is 3 working days.
Ships free via UPS/USPS.

projavo1024

$210.00

PROJAVO1001
1" x 4" x 48"

20 BF Avodire project pack

Lengths: 48″-92″ (last piece might be shorter to balance bd.ft total)
Widths: 4″ and wider
Thickness: 4/4 nominal

We S2S by default – surfaced thickness will be up to 1/4″ less than nominal thickness. (image is of S2S boards)
You can choose to get the lumber in the rough by selecting Machining = none and get an additional $20 off.

Note:
Lead time is 3 working days.
Ships free via UPS/USPS.

projcedalas1024

$313.00$351.00

PROJCEDALAS1001
" x " x "

20 BF Alaskan Yellow Cedar project pack

Lengths: 48″-92″ (last piece might be shorter to balance BF total)
Widths: 3″ and wider
Thickness: Choose 4/4 or 8/4 lumber or 8/4 Vertical grain lumber.

We S2S by default – surfaced thickness will be up to 1/4″ less than nominal thickness.
You can choose to get the lumber in the rough by selecting Machining = none and get an additional $20 off.

Note:
Lead time is 3 working days.
Ships free via UPS/USPS.

projpadauk1024

$310.00$350.00

PROJPADAUK1001
" x " x "

20 BF Padauk project pack

Lengths: 48″-92″ (last piece might be shorter to balance BF total)
Widths: 4″ and wider
Thickness: Choose 4/4, 6/4 or 8/4 nominal

We S2S by default – surfaced thickness will be up to 1/4″ less than nominal thickness.
You can choose to get the lumber in the rough by selecting Machining = none and get an additional $20 off.

Note:
Lead time is 3 working days.
Ships free via UPS/USPS.

On Sale!
IVRED1014_1

$246.89

IVRED1014
1.3" x 7" x 53.25"

Min width 5.5″. Max width 7.5″. Heart checks. Small tight knots

IVRED1031_1

$596.95

IVRED1031
2.75" x 8" x 54.75"

Surface checks in sapwood. End checks and pith one side.

KINGB186_2

$1,750.00

KINGB186
6" x 7" x 56"

Stunning Kingwood Boule – sold as one
All pieces are from the same log, so book-matched.
Sold individually pieces would cost over $2000.  Now on special for $1750

PIECELENWIDTHILBGRDNOTES
KINGB186A            56.0              6.5              1.0              5.4ASolid, no checks.
KINGB186B            56.0              7.3              0.9              6.5AWidest point 8”.
KINGB186C            56.0              7.8              1.4            10.6ABCracks on ends.
KINGB186D            56.0              7.3              1.0              6.2AWidest point 8”. Check one end.
KINGB186E            56.0              5.8              1.0            12.2AClear two face.
IVRED1022_1

$168.37

IVRED1022
1.55" x 5" x 33.75"

Max width 7.5″. Min width 4″. End checks. Mostly sap on reverse face

WOOD OF THE WEEK

15% off - this week only

Wenge
Wenge Lumber @ Rare Woods USA

Wenge is unique among the world’s exotic woods. This tough tropical wood’s distinctive deep chocolate color — which can sometimes augmented by muted gold, orange, red or even burgundy tint — is actually known as “Wenge” in the color spectrum nomenclature of various parts of the world (with paint manufacturers, etc.). Its grains are generally straight (though sometimes wavy or irregular) and are accenuated by overlapping black lines which typically decorate the board’s surface.

While being considered a strong, durable wood, Wenge’s course, rugged texture makes it very splintery — making some craftsmen hesitant to use it. It can be difficult to work, although is glues well and is considered a very dimensionally stable species.

Exercise caution when working with this wood. Its splinters can be like little razors and when one pentetrates the skin, it is quite painful and the area can quickly and easily get infected, if quick action isn’t taken to remove it (the splinter) and sterilize the area.

Although most sources consider Wenge to be a dull wood with poor natural luster, our experience has revealed that a deep, glossy luster can sometimes emerge through fine-grit sanding of flatsawn boards. Its combination of relatively light weight, rot & insect resistance and impressive tensil strength has yielded the wood to a variety of indoor and outdoor uses, being particularly well suited for flooring in heavy traffic areas.

Wenge Lumber @ Rare Woods USA
Main Color GroupDark Brown
Grain Pattern Pronounced
Avg Dry Weight - LB/BF4.5
Avg Dry Weight - KG/M3870
Janka Hardness - LBF1930
Janka Hardness - N8600
0
    0
    Your Cart
    Your cart is emptyReturn to Shop