Page not found
BROWSE THOUSANDS OF LUMBER PRODUCTS
Individual Pieces
$47.08
Skip planed,Bark inclusion,Edge defect,Grain deterioration
Pre-cut Sizes
$450.00
African Blackwood Bagpipe Set – Instrument Grade.
14 Pieces (metric mm / +- imperial inches):
1 of 54 x 54 x 305 / 2 x 2 x 12
2 of 51 x 51 x 205 / 2 x 2 x 8
1 of 38 x 38 x 385 / 1.5 x 1.5 x 15
1 of 47 x 47 x 310 / 2 x 2 x 12
1 of 47 x 47 x 195 / 2 x 2 x 8
2 of 47 x 47 x 160 / 2 x 2 x 6
1 of 47 x 47 x 125 / 2 x 2 x 5
1 of 47 x 47 x 115 / 2 x 2 x 4.5
1 of 38 x 38 x 310 / 1.5 x 1.5 x 12
1 of 38 x 38 x 245 / 1.5 x 1.5 x 10
2 of 38 x 38 x 220 / 1.5 x 1.5 x 9
Lumber Packs
20 BF Spanish Cedar project pack
Lengths: 48″-92″ (last piece might be shorter to balance BF total)
Widths: 4″ and wider
Thickness: Choose 4/4 or 6/4 lumber.
We S2S by default – surfaced thickness will be up to 1/4″ less than nominal thickness.
You can choose to get the lumber in the rough by selecting Machining = none and get an additional $20 off.
Note:
Lead time is 3 working days.
Ships free via UPS/USPS.
$461.00 – $480.00
20 BF Wenge project pack
Lengths: 60″-92″ (last piece might be shorter to balance BF total)
Widths: 4″ and wider
Thickness: Choose 4/4, 5/4 Unsteamed, 6/4 or 8/4 nominal
We S2S by default – surfaced thickness will be up to 1/4″ less than nominal thickness.
You can choose to get the lumber in the rough by selecting Machining = none and get an additional $20 off.
Note:
Lead time on rough lumber is 2 working days.
Lead time on S2S is 3 working days.
Ships free via UPS/USPS.
$280.00
20 BF Curly Cherry project pack
Lengths: 48″-92″ (last piece might be shorter to balance bd.ft total)
Widths: 4″ and wider
Thickness: 4/4 nominal
Grade: 1 common + better
We S2S by default – surfaced thickness will be up to 1/4″ less than nominal thickness. (image is of S2S boards)
You can choose to get the lumber in the rough by selecting Machining = none and get an additional $20 off.
Note:
Lead time is 3 working days.
Ships free via UPS/USPS.
$850.00
20 BF Amara Ebony project pack
Lengths: 48″-92″ (last piece might be shorter to balance bd.ft total)
Widths: 3″ and wider
Thickness: 4/4 nominal
We S2S by default – surfaced thickness will be up to 1/4″ less than nominal thickness.
You can choose to get the lumber in the rough by selecting Machining = none and get an additional $20 off.
Note:
Lead time is 3 working days.
Ships free via UPS/USPS.
On Sale!
$313.85 $219.70
Max width 13″. Cracks and defects both faces
$410.42 $287.29
Max width 7″. Min 6″. Some checks through center of board
$240.53 $168.37
Max width 7.5″. Min width 4″. End checks. Mostly sap on reverse face
$380.02 $266.01
Max width 8.5″. Min width 3.75″. Crack on one face