Page not found
BROWSE THOUSANDS OF LUMBER PRODUCTS
Individual Pieces
$98.10
Cracks. Defects on surface and edge. Skip planed.
Pre-cut Sizes
$45.00
Bookmatched Guitar Sides set
$70.00
4-piece pack: B Grade Pink Ivory Turning Squares.Rough Dimensions: 2.0×2.0x12″50% cheaper than our A grade price.Pieces might have wane, sap, cracks present and/or be of lower color quality.We photograph all 4 sides of each piece/pack. What you see is what you get.
$70.00
4-piece pack: B Grade Pink Ivory Turning Squares.
Rough Dimensions: 2.0×2.0x12″
50% cheaper than our A grade price.
Pieces might have wane, sap, cracks present and/or be of lower color quality.
We photograph all 4 sides of each piece/pack.
What you see is what you get.
Lumber Packs
$320.00
20 BF Leopardwood project pack
Flecking: More scaly than lace’y (Unfortunately our stock is cut flat rather than QS, so flecking is not as pronounced as on QS stock – picture is indicative of our stock)
Lengths: 48″-92″ (last piece might be shorter to balance bd.ft total)
Widths: 4″ and wider
Thickness: 4/4 nominal
We S2S by default – surfaced thickness will be up to 1/4″ less than nominal thickness. (image is of S2S boards)
You can choose to get the lumber in the rough by selecting Machining = none and get an additional $20 off.
a
Note:
Lead time is 3 working days.
Ships free via UPS/USPS.
$271.00 – $290.00
20 BF Genuine Mahogany project pack
Lengths: 60″-92″ (last piece might be shorter to balance BF total)
Widths: 4″ and wider
Thickness: Choose 4/4, 6/4 or 8/4 nominal
We S2S by default – surfaced thickness will be up to 1/4″ less than nominal thickness.
You can choose to get the lumber in the rough by selecting Machining = none and get an additional $20 off.
Note:
Lead time is 3 working days.
Ships free via UPS/USPS.
$228.00
20 BF Low-Medium Figure Birdseye Maple – Heart 2 Faces (Brown) project pack
Figure: Low-Medium
Color: Some brown on both faces (or more figured face)
Lengths: 60″-92″ (last piece might be shorter to balance bd.ft total)
Widths: 4″ and wider
Thickness: 4/4 nominal
We S2S by default – surfaced thickness will be up to 1/4″ less than nominal thickness.
You can choose to get the lumber in the rough by selecting Machining = none and get an additional $20 off.
Note:
Lead time on rough lumber is 2 working days.
Lead time on S2S is 3 working days.
Ships free via UPS/USPS.
$2,055.68 $1,750.00
Stunning Kingwood Boule – sold as one
All pieces are from the same log, so book-matched.
Sold individually pieces would cost over $2000. Now on special for $1750
PIECE | LEN | WID | THI | LB | GRD | NOTES |
KINGB186A | 56.0 | 6.5 | 1.0 | 5.4 | A | Solid, no checks. |
KINGB186B | 56.0 | 7.3 | 0.9 | 6.5 | A | Widest point 8”. |
KINGB186C | 56.0 | 7.8 | 1.4 | 10.6 | AB | Cracks on ends. |
KINGB186D | 56.0 | 7.3 | 1.0 | 6.2 | A | Widest point 8”. Check one end. |
KINGB186E | 56.0 | 5.8 | 1.0 | 12.2 | A | Clear two face. |
On Sale!
$405.36 $283.75
Max width 9″. Min width 6.5″. Hairline cracks on sappy face. One large defect with hairline crack on good face
$1,875.93 $1,700.00
Stunning Kingwood Boule – sold as one
All pieces are from the same log, so book-matched.
Sold individually pieces would cost almost $1900. Now on special for $1700
PIECE | LEN | WID | THI | LB | GRD | NOTES |
KINGB190A | 60.75 | 5.50 | 1.00 | 5.4 | A | Nice Board. |
KINGB190B | 60.5 | 6.50 | 1.06 | 6.5 | A | 6″ crack on end. |
KINGB190C | 61.0 | 7.00 | 2.25 | 10.6 | C | Rustic. |
KINGB190D | 60.5 | 6.00 | 1.00 | 6.2 | A | Small crack on end. |
$2,055.68 $1,750.00
Stunning Kingwood Boule – sold as one
All pieces are from the same log, so book-matched.
Sold individually pieces would cost over $2000. Now on special for $1750
PIECE | LEN | WID | THI | LB | GRD | NOTES |
KINGB186A | 56.0 | 6.5 | 1.0 | 5.4 | A | Solid, no checks. |
KINGB186B | 56.0 | 7.3 | 0.9 | 6.5 | A | Widest point 8”. |
KINGB186C | 56.0 | 7.8 | 1.4 | 10.6 | AB | Cracks on ends. |
KINGB186D | 56.0 | 7.3 | 1.0 | 6.2 | A | Widest point 8”. Check one end. |
KINGB186E | 56.0 | 5.8 | 1.0 | 12.2 | A | Clear two face. |
$394.43 $276.10
Max width 8″. Min width 6.25″. Large defect one end. Good face has 2 small knots. Defects on reverse face